6902, 6902-2Z, 6902-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6902, 6902-2Z, 6902-2RS Ball Bearing, ISO 15
1 / 7

6902, 6902-2Z, 6902-2RS Ball Bearing, ISO 15

The 6902 ball bearing (ISO 15) has a 15 mm bore, a 28 mm outside diameter and a width of 7 mm. Get it as simplified STEP files.

6902 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6902 bearing, 6902-2Z bearing, 6902-2RS bearing
  • Model id: iso15-6902
  • Standard: ISO 15 · size 6902

Versions

DesignationWhat differsPart keySimplified
6902openiso15-6902STEP
6902-2Z2Z (shielded)iso15-6902-2zSTEP
6902-2RS2RS (sealed)iso15-6902-2rsSTEP

Dimensions

Dimension symbols for 6902 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1515nominalL1
DOutside diameter2828nominalL1
BWidth77nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6902 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6902.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 4750 N
  • Basic Load Ratings, C0r: 2260 N
  • Limiting Speeds, Grease: 26000 min-1
  • Limiting Speeds, Oil (Oil-bath): 30000 min-1

The 6902 ball bearing beside the 6802 and the 16002

The 6902 is number 37 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 15 mm on the 6902 ball bearing, the same on the 6802 and the 16002.
  • Outside diameter (D): 28 mm on the 6902 ball bearing, against 24 mm on the 6802 and 32 mm on the 16002.
  • Width (B): 7 mm on the 6902 ball bearing, against 5 mm on the 6802 and 8 mm on the 16002.
  • Chamfer dimension (r): at least 0.3 mm on the 6902 ball bearing, the same on the 6802 and the 16002.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6902.pdf

* CC-1S015-DS-6902 revA '?) CommunityCAD Size datasheet - 6902 ISO 15 6902 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 15 mm shafts Part keys iso15-6902, iso15-6902-2z, iso15-6902-2rs Files 3 STEP…

View full datasheet →

docs/CC-ISO15-SZ-6902.pdf

ISO 15 single row deep groove ball bearings, 6902 Size drawing - 6902 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 6902 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →