6900, 6900-2Z, 6900-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6900, 6900-2Z, 6900-2RS Ball Bearing, ISO 15
1 / 7

6900, 6900-2Z, 6900-2RS Ball Bearing, ISO 15

For a 10 mm shaft and a 22 mm housing bore, the 6900 ball bearing (ISO 15) is 6 mm wide. Modeled as simplified STEP files.

6900 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6900 bearing, 6900-2Z bearing, 6900-2RS bearing
  • Model id: iso15-6900
  • Standard: ISO 15 · size 6900

Versions

DesignationWhat differsPart keySimplified
6900openiso15-6900STEP
6900-2Z2Z (shielded)iso15-6900-2zSTEP
6900-2RS2RS (sealed)iso15-6900-2rsSTEP

Dimensions

Dimension symbols for 6900 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1010nominalL1
DOutside diameter2222nominalL1
BWidth66nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6900 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6900.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 2970 N
  • Basic Load Ratings, C0r: 1270 N
  • Limiting Speeds, Grease: 32000 min-1
  • Limiting Speeds, Oil (Oil-bath): 38000 min-1

The 6900 ball bearing beside the 6800 and the 6000

The 6900 is number 26 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 10 mm on the 6900 ball bearing, the same on the 6800 and the 6000.
  • Outside diameter (D): 22 mm on the 6900 ball bearing, against 19 mm on the 6800 and 26 mm on the 6000.
  • Width (B): 6 mm on the 6900 ball bearing, against 5 mm on the 6800 and 8 mm on the 6000.
  • Chamfer dimension (r): at least 0.3 mm on the 6900 ball bearing, the same on the 6800 and the 6000.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6900.pdf

* CC-1S015-DS-6900 rev A '?) CommunityCAD Size datasheet - 6900 ISO 15 6900 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 10 mm shafts Part keys iso15-6900, iso15-6900-2z, iso15-6900-2rs Files 3 STEP…

View full datasheet →

docs/CC-ISO15-SZ-6900.pdf

ISO 15 single row deep groove ball bearings, 6900 Size drawing - 6900 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 6900 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →