16002, 16002-2Z, 16002-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
16002, 16002-2Z, 16002-2RS Ball Bearing, ISO 15
1 / 7

16002, 16002-2Z, 16002-2RS Ball Bearing, ISO 15

For a 15 mm shaft and a 32 mm housing bore, the 16002 ball bearing (ISO 15) is 8 mm wide. Modeled as simplified STEP files.

16002 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 16002 bearing, 16002-2Z bearing, 16002-2RS bearing
  • Model id: iso15-16002
  • Standard: ISO 15 · size 16002

Versions

DesignationWhat differsPart keySimplified
16002openiso15-16002STEP
16002-2Z2Z (shielded)iso15-16002-2zSTEP
16002-2RS2RS (sealed)iso15-16002-2rsSTEP

Dimensions

Dimension symbols for 16002 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1515nominalL1
DOutside diameter3232nominalL1
BWidth88nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 16002 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-16002.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 6150 N
  • Basic Load Ratings, C0r: 2840 N
  • Limiting Speeds, Grease: 24000 min-1
  • Limiting Speeds, Oil (Oil-bath): 28000 min-1

The 16002 ball bearing beside the 6902 and the 6002

The 16002 is number 38 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 15 mm on the 16002 ball bearing, the same on the 6902 and the 6002.
  • Outside diameter (D): 32 mm on the 16002 ball bearing, against 28 mm on the 6902 and 32 mm on the 6002.
  • Width (B): 8 mm on the 16002 ball bearing, against 7 mm on the 6902 and 9 mm on the 6002.
  • Chamfer dimension (r): at least 0.3 mm on the 16002 ball bearing, the same on the 6902 and the 6002.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-SZ-16002.pdf

ISO 15 single row deep groove ball bearings, 16002 Size drawing - 16002 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 16002 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →

docs/CC-ISO15-DS-16002.pdf

CC-1S015-DS-16002 rev A Size datasheet - 16002 '?) CommunityCAD ISO 15 16002 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 15 mm shafts Part keys iso15-16002, iso15-16002- 2z, iso15-16002-2rs Files 3…

View full datasheet →