6905, 6905-2Z, 6905-2RS Ball Bearing, ISO 15
For a 25 mm shaft and a 42 mm housing bore, the 6905 ball bearing (ISO 15) is 9 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 6905 bearing, 6905-2Z bearing, 6905-2RS bearing
- Model id:
iso15-6905
- Standard: ISO 15 · size 6905
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 6905 | open | iso15-6905 | STEP |
| 6905-2Z | 2Z (shielded) | iso15-6905-2z | STEP |
| 6905-2RS | 2RS (sealed) | iso15-6905-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 25 | | 25 | nominal | L1 |
| D | Outside diameter | | 42 | | 42 | nominal | L1 |
| B | Width | | 9 | | 9 | nominal | L1 |
| r | Chamfer dimension | 0.3 | | | 0.3 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-6905.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 7750 N
- Basic Load Ratings, C0r: 4550 N
- Limiting Speeds, Grease: 16000 min-1
- Limiting Speeds, Oil (Oil-bath): 19000 min-1
The 6905 ball bearing beside the 6805 and the 16005
The 6905 is number 58 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 25 mm on the 6905 ball bearing, the same on the 6805 and the 16005.
- Outside diameter (D): 42 mm on the 6905 ball bearing, against 37 mm on the 6805 and 47 mm on the 16005.
- Width (B): 9 mm on the 6905 ball bearing, against 7 mm on the 6805 and 8 mm on the 16005.
- Chamfer dimension (r): at least 0.3 mm on the 6905 ball bearing, the same on the 6805 and the 16005.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.