6903, 6903-2Z, 6903-2RS Ball Bearing, ISO 15
The 6903 ball bearing (ISO 15) has a 17 mm bore, a 30 mm outside diameter and a width of 7 mm. Get it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 6903 bearing, 6903-2Z bearing, 6903-2RS bearing
- Model id:
iso15-6903
- Standard: ISO 15 · size 6903
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 6903 | open | iso15-6903 | STEP |
| 6903-2Z | 2Z (shielded) | iso15-6903-2z | STEP |
| 6903-2RS | 2RS (sealed) | iso15-6903-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 17 | | 17 | nominal | L1 |
| D | Outside diameter | | 30 | | 30 | nominal | L1 |
| B | Width | | 7 | | 7 | nominal | L1 |
| r | Chamfer dimension | 0.3 | | | 0.3 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-6903.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 5050 N
- Basic Load Ratings, C0r: 2550 N
- Limiting Speeds, Grease: 24000 min-1
- Limiting Speeds, Oil (Oil-bath): 28000 min-1
The 6903 ball bearing beside the 6803 and the 16003
The 6903 is number 43 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 17 mm on the 6903 ball bearing, the same on the 6803 and the 16003.
- Outside diameter (D): 30 mm on the 6903 ball bearing, against 26 mm on the 6803 and 35 mm on the 16003.
- Width (B): 7 mm on the 6903 ball bearing, against 5 mm on the 6803 and 8 mm on the 16003.
- Chamfer dimension (r): at least 0.3 mm on the 6903 ball bearing, the same on the 6803 and the 16003.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.