6904, 6904-2Z, 6904-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6904, 6904-2Z, 6904-2RS Ball Bearing, ISO 15
1 / 7

6904, 6904-2Z, 6904-2RS Ball Bearing, ISO 15

The 6904 ball bearing (ISO 15) has a 20 mm bore, a 37 mm outside diameter and a width of 9 mm. Get it as simplified STEP files.

6904 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6904 bearing, 6904-2Z bearing, 6904-2RS bearing
  • Model id: iso15-6904
  • Standard: ISO 15 · size 6904

Versions

DesignationWhat differsPart keySimplified
6904openiso15-6904STEP
6904-2Z2Z (shielded)iso15-6904-2zSTEP
6904-2RS2RS (sealed)iso15-6904-2rsSTEP

Dimensions

Dimension symbols for 6904 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter2020nominalL1
DOutside diameter3737nominalL1
BWidth99nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6904 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6904.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 7000 N
  • Basic Load Ratings, C0r: 3700 N
  • Limiting Speeds, Grease: 19000 min-1
  • Limiting Speeds, Oil (Oil-bath): 22000 min-1

The 6904 ball bearing beside the 6804 and the 16004

The 6904 is number 49 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 20 mm on the 6904 ball bearing, the same on the 6804 and the 16004.
  • Outside diameter (D): 37 mm on the 6904 ball bearing, against 32 mm on the 6804 and 42 mm on the 16004.
  • Width (B): 9 mm on the 6904 ball bearing, against 7 mm on the 6804 and 8 mm on the 16004.
  • Chamfer dimension (r): at least 0.3 mm on the 6904 ball bearing, the same on the 6804 and the 16004.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6904.pdf

. CC-1S015-DS-6904 revA '?) CommunityCAD Size datasheet - 6904 ISO 15 6904 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 20 mm shafts Part keys iso15-6904, iso15-6904-2z, iso15-6904-2rs Files 3 STEP…

View full datasheet →

docs/CC-ISO15-SZ-6904.pdf

ISO 15 single row deep groove ball bearings, 6904 Size drawing - 6904 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 6904 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →