6906, 6906-2Z, 6906-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6906, 6906-2Z, 6906-2RS Ball Bearing, ISO 15
1 / 7

6906, 6906-2Z, 6906-2RS Ball Bearing, ISO 15

The 6906 ball bearing (ISO 15) has a 30 mm bore, a 47 mm outside diameter and a width of 9 mm. Get it as simplified STEP files.

6906 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6906 bearing, 6906-2Z bearing, 6906-2RS bearing
  • Model id: iso15-6906
  • Standard: ISO 15 · size 6906

Versions

DesignationWhat differsPart keySimplified
6906openiso15-6906STEP
6906-2Z2Z (shielded)iso15-6906-2zSTEP
6906-2RS2RS (sealed)iso15-6906-2rsSTEP

Dimensions

Dimension symbols for 6906 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter3030nominalL1
DOutside diameter4747nominalL1
BWidth99nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6906 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6906.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 7950 N
  • Basic Load Ratings, C0r: 5000 N
  • Limiting Speeds, Grease: 14000 min-1
  • Limiting Speeds, Oil (Oil-bath): 17000 min-1

The 6906 ball bearing beside the 6806 and the 16006

The 6906 is number 67 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 30 mm on the 6906 ball bearing, the same on the 6806 and the 16006.
  • Outside diameter (D): 47 mm on the 6906 ball bearing, against 42 mm on the 6806 and 55 mm on the 16006.
  • Width (B): 9 mm on the 6906 ball bearing, against 7 mm on the 6806 and 9 mm on the 16006.
  • Chamfer dimension (r): at least 0.3 mm on the 6906 ball bearing, the same on the 6806 and the 16006.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6906.pdf

. CC-1S015-DS-6906 rev A '?) CommunityCAD Size datasheet - 6906 ISO 15 6906 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 30 mm shafts Part keys iso15-6906, iso15-6906-2z, Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-6906.pdf

ISO 15 single row deep groove ball bearings, 6906 Size drawing - 6906 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 6906 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →