6802, 6802-2Z, 6802-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6802, 6802-2Z, 6802-2RS Ball Bearing, ISO 15
1 / 7

6802, 6802-2Z, 6802-2RS Ball Bearing, ISO 15

For a 15 mm shaft and a 24 mm housing bore, the 6802 ball bearing (ISO 15) is 5 mm wide. Modeled as simplified STEP files.

6802 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6802 bearing, 6802-2Z bearing, 6802-2RS bearing
  • Model id: iso15-6802
  • Standard: ISO 15 · size 6802

Versions

DesignationWhat differsPart keySimplified
6802openiso15-6802STEP
6802-2Z2Z (shielded)iso15-6802-2zSTEP
6802-2RS2RS (sealed)iso15-6802-2rsSTEP

Dimensions

Dimension symbols for 6802 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1515nominalL1
DOutside diameter2424nominalL1
BWidth55nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6802 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6802.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 2280 N
  • Basic Load Ratings, C0r: 1260 N
  • Limiting Speeds, Grease: 28000 min-1
  • Limiting Speeds, Oil (Oil-bath): 34000 min-1

The 6802 ball bearing beside the 6301 and the 6902

The 6802 is number 36 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 15 mm on the 6802 ball bearing, against 12 mm on the 6301 and 15 mm on the 6902.
  • Outside diameter (D): 24 mm on the 6802 ball bearing, against 37 mm on the 6301 and 28 mm on the 6902.
  • Width (B): 5 mm on the 6802 ball bearing, against 12 mm on the 6301 and 7 mm on the 6902.
  • Chamfer dimension (r): at least 0.3 mm on the 6802 ball bearing, against at least 1 mm on the 6301 and at least 0.3 mm on the 6902.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6802.pdf

CC-1S015-DS-6802 rev A Size datasheet - 6802 '?) CommunityCAD ISO 15 6802 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 15 mm shafts Part keys iso15-6802, iso15-6802-2z, Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-6802.pdf

ISO 15 single row deep groove ball bearings, 6802 Size drawing - 6802 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 6802 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →