6804, 6804-2Z, 6804-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6804, 6804-2Z, 6804-2RS Ball Bearing, ISO 15
1 / 7

6804, 6804-2Z, 6804-2RS Ball Bearing, ISO 15

For a 20 mm shaft and a 32 mm housing bore, the 6804 ball bearing (ISO 15) is 7 mm wide. Modeled as simplified STEP files.

6804 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6804 bearing, 6804-2Z bearing, 6804-2RS bearing
  • Model id: iso15-6804
  • Standard: ISO 15 · size 6804

Versions

DesignationWhat differsPart keySimplified
6804openiso15-6804STEP
6804-2Z2Z (shielded)iso15-6804-2zSTEP
6804-2RS2RS (sealed)iso15-6804-2rsSTEP

Dimensions

Dimension symbols for 6804 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter2020nominalL1
DOutside diameter3232nominalL1
BWidth77nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6804 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6804.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 4400 N
  • Basic Load Ratings, C0r: 2470 N
  • Limiting Speeds, Grease: 22000 min-1
  • Limiting Speeds, Oil (Oil-bath): 26000 min-1

The 6804 ball bearing beside the 6303 and the 6904

The 6804 is number 48 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 20 mm on the 6804 ball bearing, against 17 mm on the 6303 and 20 mm on the 6904.
  • Outside diameter (D): 32 mm on the 6804 ball bearing, against 47 mm on the 6303 and 37 mm on the 6904.
  • Width (B): 7 mm on the 6804 ball bearing, against 14 mm on the 6303 and 9 mm on the 6904.
  • Chamfer dimension (r): at least 0.3 mm on the 6804 ball bearing, against at least 1 mm on the 6303 and at least 0.3 mm on the 6904.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6804.pdf

. CC-1S015-DS-6804 revA '?) CommunityCAD Size datasheet - 6804 ISO 15 6804 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 20 mm shafts Part keys iso15-6804, iso15-6804-2z, Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-6804.pdf

ISO 15 single row deep groove ball bearings, 6804 Size drawing - 6804 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 6804 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →