6801, 6801-2Z, 6801-2RS Ball Bearing, ISO 15
For a 12 mm shaft and a 21 mm housing bore, the 6801 ball bearing (ISO 15) is 5 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 6801 bearing, 6801-2Z bearing, 6801-2RS bearing
- Model id:
iso15-6801
- Standard: ISO 15 · size 6801
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 6801 | open | iso15-6801 | STEP |
| 6801-2Z | 2Z (shielded) | iso15-6801-2z | STEP |
| 6801-2RS | 2RS (sealed) | iso15-6801-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 12 | | 12 | nominal | L1 |
| D | Outside diameter | | 21 | | 21 | nominal | L1 |
| B | Width | | 5 | | 5 | nominal | L1 |
| r | Chamfer dimension | 0.3 | | | 0.3 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-6801.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 2110 N
- Basic Load Ratings, C0r: 1040 N
- Limiting Speeds, Grease: 32000 min-1
- Limiting Speeds, Oil (Oil-bath): 38000 min-1
The 6801 ball bearing beside the 6300 and the 6901
The 6801 is number 30 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 12 mm on the 6801 ball bearing, against 10 mm on the 6300 and 12 mm on the 6901.
- Outside diameter (D): 21 mm on the 6801 ball bearing, against 35 mm on the 6300 and 24 mm on the 6901.
- Width (B): 5 mm on the 6801 ball bearing, against 11 mm on the 6300 and 6 mm on the 6901.
- Chamfer dimension (r): at least 0.3 mm on the 6801 ball bearing, against at least 0.6 mm on the 6300 and at least 0.3 mm on the 6901.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.