6803, 6803-2Z, 6803-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6803, 6803-2Z, 6803-2RS Ball Bearing, ISO 15
1 / 7

6803, 6803-2Z, 6803-2RS Ball Bearing, ISO 15

For a 17 mm shaft and a 26 mm housing bore, the 6803 ball bearing (ISO 15) is 5 mm wide. Modeled as simplified STEP files.

6803 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6803 bearing, 6803-2Z bearing, 6803-2RS bearing
  • Model id: iso15-6803
  • Standard: ISO 15 · size 6803

Versions

DesignationWhat differsPart keySimplified
6803openiso15-6803STEP
6803-2Z2Z (shielded)iso15-6803-2zSTEP
6803-2RS2RS (sealed)iso15-6803-2rsSTEP

Dimensions

Dimension symbols for 6803 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1717nominalL1
DOutside diameter2626nominalL1
BWidth55nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6803 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6803.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 2890 N
  • Basic Load Ratings, C0r: 1570 N
  • Limiting Speeds, Grease: 26000 min-1
  • Limiting Speeds, Oil (Oil-bath): 30000 min-1

The 6803 ball bearing beside the 6302 and the 6903

The 6803 is number 42 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 17 mm on the 6803 ball bearing, against 15 mm on the 6302 and 17 mm on the 6903.
  • Outside diameter (D): 26 mm on the 6803 ball bearing, against 42 mm on the 6302 and 30 mm on the 6903.
  • Width (B): 5 mm on the 6803 ball bearing, against 13 mm on the 6302 and 7 mm on the 6903.
  • Chamfer dimension (r): at least 0.3 mm on the 6803 ball bearing, against at least 1 mm on the 6302 and at least 0.3 mm on the 6903.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6803.pdf

. CC-1S015-DS-6803 revA '?) CommunityCAD Size datasheet - 6803 ISO 15 6803 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 17 mm shafts Part keys iso15-6803, iso15-6803-2z, iso15-6803-2rs CT] Files 3…

View full datasheet →

docs/CC-ISO15-SZ-6803.pdf

ISO 15 single row deep groove ball bearings, 6803 Size drawing - 6803 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 Bearing 6803 | D=26 Source levels | Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →