. CC-1S015-DS-6804 revA '?) CommunityCAD Size datasheet - 6804
ISO 15 6804 deep groove ball bearing
Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts.
For 20 mm shafts Part keys iso15-6804, iso15-6804-2z, Files 3 STEP AP214 (simplified): open, 2Z, 2RS 6804 -2Z, front view, 1:1 6804-22Z, view from above, 0.75:1
Sym. Dimension Value Level
d Bore diameter 20 L1- 2
D Outside diameter 32 Li + 2
B Width 7 la +2
r Chamfer dimension r_s min 2 0.3 l1 +2
Modeled value: nominal, else the midpoint of min-max. =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 15 (edition not printed by the sources) Page 1/2 Deep groove ball bearing - 6804 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 6aab1ad286d2ad639684ae08e37affb4700Ffd8f
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-1S015-DS-6804 rev A '?) CommunityCAD Size datasheet - 6804
Conventions
e Rings and corners: Bore d, outside diameter D and width B at their nominals; the rings concentric, their faces flush. The eight ring corners are
quarter-rounds of r_s min, the smallest the standard allows; the shape isn't specified.
« Ring faces: Each ring's face is (D - d)/8 wide; the annulus between them is the middle half of the radial section.
« Shield and seal (2Z, 2RS): A flat annulus recessed r_s min / 2 below the ring faces, the same for both: no groove, snap wire or lip.
« Open bearing: The annulus recessed B/4 per face, leaving a solid web between the rings. Balls, cage and raceways are not modeled.
« Values: d, D and B at their nominals; r at r_s min, the only limit the sources give.
« Markings and grades: No markings. Tolerance class, internal clearance and lubricant are not geometry: one model per bearing and product.
Sources Source Publisher Retrieved sha256 nsk-dgbb NSK 2026-10-26 ef9d54e1ca7F ntn-bearingfinder-dgbb NTN Americas 2026-10-26 2b57833Fe316
The whole series (verification map, corrections, drawings): CC-ISO15-DS.
ISO 15 (edition not printed by the sources) Page 2/2 Deep groove ball bearing - 6804 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 6aab1ad286d2ad639684ae08e37affb4700Ffd8f
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.