6800, 6800-2Z, 6800-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6800, 6800-2Z, 6800-2RS Ball Bearing, ISO 15
1 / 7

6800, 6800-2Z, 6800-2RS Ball Bearing, ISO 15

The 6800 ball bearing (ISO 15) has a 10 mm bore, a 19 mm outside diameter and a width of 5 mm. Get it as simplified STEP files.

6800 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6800 bearing, 6800-2Z bearing, 6800-2RS bearing
  • Model id: iso15-6800
  • Standard: ISO 15 · size 6800

Versions

DesignationWhat differsPart keySimplified
6800openiso15-6800STEP
6800-2Z2Z (shielded)iso15-6800-2zSTEP
6800-2RS2RS (sealed)iso15-6800-2rsSTEP

Dimensions

Dimension symbols for 6800 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1010nominalL1
DOutside diameter1919nominalL1
BWidth55nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6800 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6800.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 1890 N
  • Basic Load Ratings, C0r: 840 N
  • Limiting Speeds, Grease: 34000 min-1
  • Limiting Speeds, Oil (Oil-bath): 40000 min-1

The 6800 ball bearing beside the 629 and the 6900

The 6800 is number 25 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 10 mm on the 6800 ball bearing, against 9 mm on the 629 and 10 mm on the 6900.
  • Outside diameter (D): 19 mm on the 6800 ball bearing, against 26 mm on the 629 and 22 mm on the 6900.
  • Width (B): 5 mm on the 6800 ball bearing, against 8 mm on the 629 and 6 mm on the 6900.
  • Chamfer dimension (r): at least 0.3 mm on the 6800 ball bearing, the same on the 629 and the 6900.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6800.pdf

* CC-1S015-DS-6800 rev A '?) CommunityCAD Size datasheet - 6800 ISO 15 6800 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 10 mm shafts Part keys iso15-6800, iso15-6800-2z, iso15-6800-2rs Files 3 STEP…

View full datasheet →

docs/CC-ISO15-SZ-6800.pdf

ISO 15 single row deep groove ball bearings, 6800 Size drawing - 6800 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 6800 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →