6303, 6303-2Z, 6303-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6303, 6303-2Z, 6303-2RS Ball Bearing, ISO 15
1 / 7

6303, 6303-2Z, 6303-2RS Ball Bearing, ISO 15

The 6303 ball bearing (ISO 15) has a 17 mm bore, a 47 mm outside diameter and a width of 14 mm. Get it as simplified STEP files.

6303 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6303 bearing, 6303-2Z bearing, 6303-2RS bearing
  • Model id: iso15-6303
  • Standard: ISO 15 · size 6303

Versions

DesignationWhat differsPart keySimplified
6303openiso15-6303STEP
6303-2Z2Z (shielded)iso15-6303-2zSTEP
6303-2RS2RS (sealed)iso15-6303-2rsSTEP

Dimensions

Dimension symbols for 6303 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1717nominalL1
DOutside diameter4747nominalL1
BWidth1414nominalL1
rChamfer dimension11single limit (min), modeled at the limitL1

Drawing

Drawing of the 6303 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6303.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 15000 N
  • Basic Load Ratings, C0r: 6650 N
  • Limiting Speeds, Grease: 17000 min-1
  • Limiting Speeds, Oil (Oil-bath): 20000 min-1

The 6303 ball bearing beside the 6203 and the 6804

The 6303 is number 47 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 17 mm on the 6303 ball bearing, against 17 mm on the 6203 and 20 mm on the 6804.
  • Outside diameter (D): 47 mm on the 6303 ball bearing, against 40 mm on the 6203 and 32 mm on the 6804.
  • Width (B): 14 mm on the 6303 ball bearing, against 12 mm on the 6203 and 7 mm on the 6804.
  • Chamfer dimension (r): at least 1 mm on the 6303 ball bearing, against at least 0.6 mm on the 6203 and at least 0.3 mm on the 6804.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6303.pdf

CC-1S015-DS-6303 revA Size datasheet - 6303 '?) CommunityCAD ISO 15 6303 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 17 mm shafts Part keys iso15-6303, iso15-6303-2z, iso15-6303-2rs Files 3 STEP…

View full datasheet →

docs/CC-ISO15-SZ-6303.pdf

ISO 15 single row deep groove ball bearings, 6303 Size drawing - 6303 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 D=47 View from above Bearing 6303 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →