635, 635-2Z, 635-2RS Ball Bearing, ISO 15
The 635 ball bearing (ISO 15) has a 5 mm bore, a 19 mm outside diameter and a width of 6 mm. Get it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 635 bearing, 635-2Z bearing, 635-2RS bearing
- Model id:
iso15-635
- Standard: ISO 15 · size 635
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 635 | open | iso15-635 | STEP |
| 635-2Z | 2Z (shielded) | iso15-635-2z | STEP |
| 635-2RS | 2RS (sealed) | iso15-635-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 5 | | 5 | nominal | L1 |
| D | Outside diameter | | 19 | | 19 | nominal | L1 |
| B | Width | | 6 | | 6 | nominal | L1 |
| r | Chamfer dimension | 0.3 | | | 0.3 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-635.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 2570 N
- Basic Load Ratings, C0r: 885 N
- Limiting Speeds, Grease: 32000 min-1
- Limiting Speeds, Oil (Oil-bath): 40000 min-1
The 635 ball bearing beside the 625 and the 696
The 635 is number 11 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 5 mm on the 635 ball bearing, against 5 mm on the 625 and 6 mm on the 696.
- Outside diameter (D): 19 mm on the 635 ball bearing, against 16 mm on the 625 and 15 mm on the 696.
- Width (B): 6 mm on the 635 ball bearing, against 5 mm on the 625 and 5 mm on the 696.
- Chamfer dimension (r): at least 0.3 mm on the 635 ball bearing, against at least 0.3 mm on the 625 and at least 0.2 mm on the 696.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.