689, 689-2Z, 689-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
689, 689-2Z, 689-2RS Ball Bearing, ISO 15
1 / 7

689, 689-2Z, 689-2RS Ball Bearing, ISO 15

The 689 ball bearing (ISO 15) has a 9 mm bore, a 17 mm outside diameter and a width of 4 mm. Get it as simplified STEP files.

689 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 689 bearing, 689-2Z bearing, 689-2RS bearing
  • Model id: iso15-689
  • Standard: ISO 15 · size 689

Versions

DesignationWhat differsPart keySimplified
689openiso15-689STEP
689-2Z2Z (shielded)iso15-689-2zSTEP
689-2RS2RS (sealed)iso15-689-2rsSTEP

Dimensions

Dimension symbols for 689 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter99nominalL1
DOutside diameter1717nominalL1
BWidth44nominalL1
rChamfer dimension0.20.2single limit (min), modeled at the limitL1
B1Width, shielded or sealed55nominalL1

Drawing

Drawing of the 689 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-689.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 1460 N
  • Basic Load Ratings, C0r: 665 N
  • Limiting Speeds, Grease: 36000 min-1
  • Limiting Speeds, Oil (Oil-bath): 43000 min-1

The 689 ball bearing beside the 628 and the 699

The 689 is number 21 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 9 mm on the 689 ball bearing, against 8 mm on the 628 and 9 mm on the 699.
  • Outside diameter (D): 17 mm on the 689 ball bearing, against 24 mm on the 628 and 20 mm on the 699.
  • Width (B): 4 mm on the 689 ball bearing, against 8 mm on the 628 and 6 mm on the 699.
  • Chamfer dimension (r): at least 0.2 mm on the 689 ball bearing, against at least 0.3 mm on the 628 and at least 0.3 mm on the 699.

Other sizes

Documents

Sources

nmb-dgbb, nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-SZ-689.pdf

ISO 15 single row deep groove ball bearings, 689 Size drawing - 689 values on the views - 2Z shown, width B1 (2RS the same; the open bearing is B wide) - enlarged 5:1 B1 = 5.000 View from above Bearing 689 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey…

View full datasheet →

docs/CC-ISO15-DS-689.pdf

. CC-1S015-DS-689 revA '?) CommunityCAD Size datasheet - 689 ISO 15 689 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 9 mm shafts Part keys iso15-689, iso15-689-2z, iso15-689-2rs Files 3 STEP AP214…

View full datasheet →