634, 634-2Z, 634-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
634, 634-2Z, 634-2RS Ball Bearing, ISO 15
1 / 7

634, 634-2Z, 634-2RS Ball Bearing, ISO 15

The 634 ball bearing (ISO 15) has a 4 mm bore, a 16 mm outside diameter and a width of 5 mm. Get it as simplified STEP files.

634 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 634 bearing, 634-2Z bearing, 634-2RS bearing
  • Model id: iso15-634
  • Standard: ISO 15 · size 634

Versions

DesignationWhat differsPart keySimplified
634openiso15-634STEP
634-2Z2Z (shielded)iso15-634-2zSTEP
634-2RS2RS (sealed)iso15-634-2rsSTEP

Dimensions

Dimension symbols for 634 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter44nominalL1
DOutside diameter1616nominalL1
BWidth55nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 634 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-634.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 1910 N
  • Basic Load Ratings, C0r: 670 N
  • Limiting Speeds, Grease: 36000 min-1
  • Limiting Speeds, Oil (Oil-bath): 43000 min-1

The 634 ball bearing beside the 624 and the 695

The 634 is number 7 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 4 mm on the 634 ball bearing, against 4 mm on the 624 and 5 mm on the 695.
  • Outside diameter (D): 16 mm on the 634 ball bearing, against 13 mm on the 624 and 13 mm on the 695.
  • Width (B): 5 mm on the 634 ball bearing, against 5 mm on the 624 and 4 mm on the 695.
  • Chamfer dimension (r): at least 0.3 mm on the 634 ball bearing, against at least 0.2 mm on the 624 and at least 0.2 mm on the 695.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-634.pdf

. CC-1S015-DS-634 revA '?) CommunityCAD Size datasheet - 634 ISO 15 634 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 4mm shafts Part keys iso15-634, iso15-634-2z, iso15-634-2rs Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-634.pdf

ISO 15 single row deep groove ball bearings, 634 Size drawing - 634 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 634 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →