6306, 6306-2Z, 6306-2RS Ball Bearing, ISO 15
The 6306 ball bearing (ISO 15) has a 30 mm bore, a 72 mm outside diameter and a width of 19 mm. Get it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 6306 bearing, 6306-2Z bearing, 6306-2RS bearing
- Model id:
iso15-6306
- Standard: ISO 15 · size 6306
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 6306 | open | iso15-6306 | STEP |
| 6306-2Z | 2Z (shielded) | iso15-6306-2z | STEP |
| 6306-2RS | 2RS (sealed) | iso15-6306-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 30 | | 30 | nominal | L1 |
| D | Outside diameter | | 72 | | 72 | nominal | L1 |
| B | Width | | 19 | | 19 | nominal | L1 |
| r | Chamfer dimension | 1.1 | | | 1.1 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-6306.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 29300 N
- Basic Load Ratings, C0r: 15000 N
- Limiting Speeds, Grease: 11000 min-1
- Limiting Speeds, Oil (Oil-bath): 13000 min-1
The 6306 ball bearing beside the 6206
The 6306 is the last of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 30 mm on the 6306 ball bearing, the same on the 6206.
- Outside diameter (D): 72 mm on the 6306 ball bearing, against 62 mm on the 6206.
- Width (B): 19 mm on the 6306 ball bearing, against 16 mm on the 6206.
- Chamfer dimension (r): at least 1.1 mm on the 6306 ball bearing, against at least 1 mm on the 6206.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.