625, 625-2Z, 625-2RS Ball Bearing, ISO 15
For a 5 mm shaft and a 16 mm housing bore, the 625 ball bearing (ISO 15) is 5 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 625 bearing, 625-2Z bearing, 625-2RS bearing
- Model id:
iso15-625
- Standard: ISO 15 · size 625
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 625 | open | iso15-625 | STEP |
| 625-2Z | 2Z (shielded) | iso15-625-2z | STEP |
| 625-2RS | 2RS (sealed) | iso15-625-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 5 | | 5 | nominal | L1 |
| D | Outside diameter | | 16 | | 16 | nominal | L1 |
| B | Width | | 5 | | 5 | nominal | L1 |
| r | Chamfer dimension | 0.3 | | | 0.3 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-625.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 1910 N
- Basic Load Ratings, C0r: 670 N
- Limiting Speeds, Grease: 36000 min-1
- Limiting Speeds, Oil (Oil-bath): 43000 min-1
The 625 ball bearing beside the 605 and the 635
The 625 is number 10 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 5 mm on the 625 ball bearing, the same on the 605 and the 635.
- Outside diameter (D): 16 mm on the 625 ball bearing, against 14 mm on the 605 and 19 mm on the 635.
- Width (B): 5 mm on the 625 ball bearing, against 5 mm on the 605 and 6 mm on the 635.
- Chamfer dimension (r): at least 0.3 mm on the 625 ball bearing, against at least 0.2 mm on the 605 and at least 0.3 mm on the 635.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.