697, 697-2Z, 697-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
697, 697-2Z, 697-2RS Ball Bearing, ISO 15
1 / 7

697, 697-2Z, 697-2RS Ball Bearing, ISO 15

The 697 ball bearing (ISO 15) has a 7 mm bore, a 17 mm outside diameter and a width of 5 mm. Get it as simplified STEP files.

697 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 697 bearing, 697-2Z bearing, 697-2RS bearing
  • Model id: iso15-697
  • Standard: ISO 15 · size 697

Versions

DesignationWhat differsPart keySimplified
697openiso15-697STEP
697-2Z2Z (shielded)iso15-697-2zSTEP
697-2RS2RS (sealed)iso15-697-2rsSTEP

Dimensions

Dimension symbols for 697 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter77nominalL1
DOutside diameter1717nominalL1
BWidth55nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 697 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-697.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 1770 N
  • Basic Load Ratings, C0r: 710 N
  • Limiting Speeds, Grease: 36000 min-1
  • Limiting Speeds, Oil (Oil-bath): 43000 min-1

The 697 ball bearing beside the 626 and the 607

The 697 is number 15 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 7 mm on the 697 ball bearing, against 6 mm on the 626 and 7 mm on the 607.
  • Outside diameter (D): 17 mm on the 697 ball bearing, against 19 mm on the 626 and 19 mm on the 607.
  • Width (B): 5 mm on the 697 ball bearing, against 6 mm on the 626 and 6 mm on the 607.
  • Chamfer dimension (r): at least 0.3 mm on the 697 ball bearing, the same on the 626 and the 607.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-697.pdf

. CC-1S015-DS-697 revA '?) CommunityCAD Size datasheet - 697 ISO 15 697 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 7 mm shafts Part keys iso15-697, iso15-697-2z, iso15-697-2rs Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-697.pdf

ISO 15 single row deep groove ball bearings, 697 Size drawing - 697 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 697 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →