627, 627-2Z, 627-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
627, 627-2Z, 627-2RS Ball Bearing, ISO 15
1 / 7

627, 627-2Z, 627-2RS Ball Bearing, ISO 15

The 627 ball bearing (ISO 15) has a 7 mm bore, a 22 mm outside diameter and a width of 7 mm. Get it as simplified STEP files.

627 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 627 bearing, 627-2Z bearing, 627-2RS bearing
  • Model id: iso15-627
  • Standard: ISO 15 · size 627

Versions

DesignationWhat differsPart keySimplified
627openiso15-627STEP
627-2Z2Z (shielded)iso15-627-2zSTEP
627-2RS2RS (sealed)iso15-627-2rsSTEP

Dimensions

Dimension symbols for 627 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter77nominalL1
DOutside diameter2222nominalL1
BWidth77nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 627 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-627.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 3650 N
  • Basic Load Ratings, C0r: 1370 N
  • Limiting Speeds, Grease: 30000 min-1
  • Limiting Speeds, Oil (Oil-bath): 36000 min-1

The 627 ball bearing beside the 607 and the 698

The 627 is number 17 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 7 mm on the 627 ball bearing, against 7 mm on the 607 and 8 mm on the 698.
  • Outside diameter (D): 22 mm on the 627 ball bearing, against 19 mm on the 607 and 19 mm on the 698.
  • Width (B): 7 mm on the 627 ball bearing, against 6 mm on the 607 and 6 mm on the 698.
  • Chamfer dimension (r): at least 0.3 mm on the 627 ball bearing, the same on the 607 and the 698.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-SZ-627.pdf

ISO 15 single row deep groove ball bearings, 627 Size drawing - 627 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 627 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →

docs/CC-ISO15-DS-627.pdf

'?) CommunityCAD CC-1S015-DS-627 revA Size datasheet - 627 ISO 15 627 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For Part keys poi | Files 627 -2Z, front view, 1.5:1 627-2Z, view from above, 1:1 Sym.…

View full datasheet →