629, 629-2Z, 629-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
629, 629-2Z, 629-2RS Ball Bearing, ISO 15
1 / 7

629, 629-2Z, 629-2RS Ball Bearing, ISO 15

For a 9 mm shaft and a 26 mm housing bore, the 629 ball bearing (ISO 15) is 8 mm wide. Modeled as simplified STEP files.

629 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 629 bearing, 629-2Z bearing, 629-2RS bearing
  • Model id: iso15-629
  • Standard: ISO 15 · size 629

Versions

DesignationWhat differsPart keySimplified
629openiso15-629STEP
629-2Z2Z (shielded)iso15-629-2zSTEP
629-2RS2RS (sealed)iso15-629-2rsSTEP

Dimensions

Dimension symbols for 629 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter99nominalL1
DOutside diameter2626nominalL1
BWidth88nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 629 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-629.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 5050 N
  • Basic Load Ratings, C0r: 1970 N
  • Limiting Speeds, Grease: 28000 min-1
  • Limiting Speeds, Oil (Oil-bath): 34000 min-1

The 629 ball bearing beside the 609 and the 6800

The 629 is number 24 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 9 mm on the 629 ball bearing, against 9 mm on the 609 and 10 mm on the 6800.
  • Outside diameter (D): 26 mm on the 629 ball bearing, against 24 mm on the 609 and 19 mm on the 6800.
  • Width (B): 8 mm on the 629 ball bearing, against 7 mm on the 609 and 5 mm on the 6800.
  • Chamfer dimension (r): at least 0.3 mm on the 629 ball bearing, the same on the 609 and the 6800.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-629.pdf

. CC-1S015-DS-629 revA '?) CommunityCAD Size datasheet - 629 ISO 15 629 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 9 mm shafts Part keys iso15-629, iso15-629-2z, iso15-629-2rs Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-629.pdf

ISO 15 single row deep groove ball bearings, 629 Size drawing - 629 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 | Bearing 629 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the…

View full datasheet →