607, 607-2Z, 607-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
607, 607-2Z, 607-2RS Ball Bearing, ISO 15
1 / 7

607, 607-2Z, 607-2RS Ball Bearing, ISO 15

For a 7 mm shaft and a 19 mm housing bore, the 607 ball bearing (ISO 15) is 6 mm wide. Modeled as simplified STEP files.

607 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 607 bearing, 607-2Z bearing, 607-2RS bearing
  • Model id: iso15-607
  • Standard: ISO 15 · size 607

Versions

DesignationWhat differsPart keySimplified
607openiso15-607STEP
607-2Z2Z (shielded)iso15-607-2zSTEP
607-2RS2RS (sealed)iso15-607-2rsSTEP

Dimensions

Dimension symbols for 607 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter77nominalL1
DOutside diameter1919nominalL1
BWidth66nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 607 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-607.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 2570 N
  • Basic Load Ratings, C0r: 885 N
  • Limiting Speeds, Grease: 36000 min-1
  • Limiting Speeds, Oil (Oil-bath): 43000 min-1

The 607 ball bearing beside the 697 and the 627

The 607 is number 16 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 7 mm on the 607 ball bearing, the same on the 697 and the 627.
  • Outside diameter (D): 19 mm on the 607 ball bearing, against 17 mm on the 697 and 22 mm on the 627.
  • Width (B): 6 mm on the 607 ball bearing, against 5 mm on the 697 and 7 mm on the 627.
  • Chamfer dimension (r): at least 0.3 mm on the 607 ball bearing, the same on the 697 and the 627.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-SZ-607.pdf

ISO 15 single row deep groove ball bearings, 607 Size drawing - 607 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 607 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →

docs/CC-ISO15-DS-607.pdf

'?) CommunityCAD CC-1S015-DS-607 revA Size datasheet - 607 ISO 15 607 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For Part keys O Files 607 -2Z, view from above, 1:1 607 - 2Z, front view, 2:1 Sym.…

View full datasheet →