628, 628-2Z, 628-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
628, 628-2Z, 628-2RS Ball Bearing, ISO 15
1 / 7

628, 628-2Z, 628-2RS Ball Bearing, ISO 15

For an 8 mm shaft and a 24 mm housing bore, the 628 ball bearing (ISO 15) is 8 mm wide. Modeled as simplified STEP files.

628 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 628 bearing, 628-2Z bearing, 628-2RS bearing
  • Model id: iso15-628
  • Standard: ISO 15 · size 628

Versions

DesignationWhat differsPart keySimplified
628openiso15-628STEP
628-2Z2Z (shielded)iso15-628-2zSTEP
628-2RS2RS (sealed)iso15-628-2rsSTEP

Dimensions

Dimension symbols for 628 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter88nominalL1
DOutside diameter2424nominalL1
BWidth88nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 628 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-628.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 3700 N
  • Basic Load Ratings, C0r: 1430 N
  • Limiting Speeds, Grease: 28000 min-1
  • Limiting Speeds, Oil (Oil-bath): 34000 min-1

The 628 ball bearing beside the 608 and the 689

The 628 is number 20 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 8 mm on the 628 ball bearing, against 8 mm on the 608 and 9 mm on the 689.
  • Outside diameter (D): 24 mm on the 628 ball bearing, against 22 mm on the 608 and 17 mm on the 689.
  • Width (B): 8 mm on the 628 ball bearing, against 7 mm on the 608 and 4 mm on the 689.
  • Chamfer dimension (r): at least 0.3 mm on the 628 ball bearing, against at least 0.3 mm on the 608 and at least 0.2 mm on the 689.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-628.pdf

'?) CommunityCAD CC-1S015-DS-628 revA Size datasheet - 628 ISO 15 628 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For Part keys 628 -2Z, front view, 1.5:1 628-2Z, view from above, 1:1 Sym. Dimension d…

View full datasheet →

docs/CC-ISO15-SZ-628.pdf

ISO 15 single row deep groove ball bearings, 628 Size drawing - 628 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 Bearing 628 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source…

View full datasheet →