623, 623-2Z, 623-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
623, 623-2Z, 623-2RS Ball Bearing, ISO 15
1 / 7

623, 623-2Z, 623-2RS Ball Bearing, ISO 15

The 623 ball bearing (ISO 15) has a 3 mm bore, a 10 mm outside diameter and a width of 4 mm. Get it as simplified STEP files.

623 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 623 bearing, 623-2Z bearing, 623-2RS bearing
  • Model id: iso15-623
  • Standard: ISO 15 · size 623

Versions

DesignationWhat differsPart keySimplified
623openiso15-623STEP
623-2Z2Z (shielded)iso15-623-2zSTEP
623-2RS2RS (sealed)iso15-623-2rsSTEP

Dimensions

Dimension symbols for 623 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter33nominalL1
DOutside diameter1010nominalL1
BWidth44nominalL1
rChamfer dimension0.150.15single limit (min), modeled at the limitL1

Drawing

Drawing of the 623 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-623.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 695 N
  • Basic Load Ratings, C0r: 218 N
  • Limiting Speeds, Grease: 50000 min-1
  • Limiting Speeds, Oil (Oil-bath): 60000 min-1

The 623 ball bearing beside the 603 and the 694

The 623 is number 3 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 3 mm on the 623 ball bearing, against 3 mm on the 603 and 4 mm on the 694.
  • Outside diameter (D): 10 mm on the 623 ball bearing, against 9 mm on the 603 and 11 mm on the 694.
  • Width (B): 4 mm on the 623 ball bearing, against 3 mm on the 603 and 4 mm on the 694.
  • Chamfer dimension (r): at least 0.15 mm on the 623 ball bearing, the same on the 603 and the 694.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-623.pdf

. CC-1S015-DS-623 revA '?) CommunityCAD Size datasheet - 623 ISO 15 623 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 3 mm shafts Part keys iso15-623, iso15-623-2z, iso15-623-2rs Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-623.pdf

ISO 15 single row deep groove ball bearings, 623 Size drawing - 623 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 623 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →