624, 624-2Z, 624-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
624, 624-2Z, 624-2RS Ball Bearing, ISO 15
1 / 7

624, 624-2Z, 624-2RS Ball Bearing, ISO 15

For a 4 mm shaft and a 13 mm housing bore, the 624 ball bearing (ISO 15) is 5 mm wide. Modeled as simplified STEP files.

624 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 624 bearing, 624-2Z bearing, 624-2RS bearing
  • Model id: iso15-624
  • Standard: ISO 15 · size 624

Versions

DesignationWhat differsPart keySimplified
624openiso15-624STEP
624-2Z2Z (shielded)iso15-624-2zSTEP
624-2RS2RS (sealed)iso15-624-2rsSTEP

Dimensions

Dimension symbols for 624 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter44nominalL1
DOutside diameter1313nominalL1
BWidth55nominalL1
rChamfer dimension0.20.2single limit (min), modeled at the limitL1

Drawing

Drawing of the 624 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-624.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 1430 N
  • Basic Load Ratings, C0r: 485 N
  • Limiting Speeds, Grease: 40000 min-1
  • Limiting Speeds, Oil (Oil-bath): 48000 min-1

The 624 ball bearing beside the 604 and the 634

The 624 is number 6 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 4 mm on the 624 ball bearing, the same on the 604 and the 634.
  • Outside diameter (D): 13 mm on the 624 ball bearing, against 12 mm on the 604 and 16 mm on the 634.
  • Width (B): 5 mm on the 624 ball bearing, against 4 mm on the 604 and 5 mm on the 634.
  • Chamfer dimension (r): at least 0.2 mm on the 624 ball bearing, against at least 0.2 mm on the 604 and at least 0.3 mm on the 634.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-SZ-624.pdf

ISO 15 single row deep groove ball bearings, 624 Size drawing - 624 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 13 View from above Bearing 624 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →

docs/CC-ISO15-DS-624.pdf

. CC-1S015-DS-624 revA '?) CommunityCAD Size datasheet - 624 ISO 15 624 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 4mm shafts Part keys iso15-624, iso15-624-2z, iso15-624-2rs Files 3 STEP AP214…

View full datasheet →