698, 698-2Z, 698-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
698, 698-2Z, 698-2RS Ball Bearing, ISO 15
1 / 7

698, 698-2Z, 698-2RS Ball Bearing, ISO 15

For an 8 mm shaft and a 19 mm housing bore, the 698 ball bearing (ISO 15) is 6 mm wide. Modeled as simplified STEP files.

698 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 698 bearing, 698-2Z bearing, 698-2RS bearing
  • Model id: iso15-698
  • Standard: ISO 15 · size 698

Versions

DesignationWhat differsPart keySimplified
698openiso15-698STEP
698-2Z2Z (shielded)iso15-698-2zSTEP
698-2RS2RS (sealed)iso15-698-2rsSTEP

Dimensions

Dimension symbols for 698 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter88nominalL1
DOutside diameter1919nominalL1
BWidth66nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 698 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-698.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 2460 N
  • Basic Load Ratings, C0r: 910 N
  • Limiting Speeds, Grease: 36000 min-1
  • Limiting Speeds, Oil (Oil-bath): 43000 min-1

The 698 ball bearing beside the 627 and the 608

The 698 is number 18 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 8 mm on the 698 ball bearing, against 7 mm on the 627 and 8 mm on the 608.
  • Outside diameter (D): 19 mm on the 698 ball bearing, against 22 mm on the 627 and 22 mm on the 608.
  • Width (B): 6 mm on the 698 ball bearing, against 7 mm on the 627 and 7 mm on the 608.
  • Chamfer dimension (r): at least 0.3 mm on the 698 ball bearing, the same on the 627 and the 608.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-698.pdf

'?) CommunityCAD CC-1S015-DS-698 revA Size datasheet - 698 ISO 15 698 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For Part keys Files 698 - 2Z, front view, 2:1 698- 2Z, view from above, 1:1 Sym.…

View full datasheet →

docs/CC-ISO15-SZ-698.pdf

ISO 15 single row deep groove ball bearings, 698 Size drawing - 698 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 698 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →