C8 Power Inlet, Screw Mount, Schurter 2573
The Schurter 2573 power inlet (IEC 60320 power inlet): flange width 34.3 mm, flange height 15 mm, flange thickness 4 mm. Available as simplified STEP files.

This model is CommunityCAD's own, drawn from SCHURTER's published drawing; SCHURTER did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: Schurter 2573 IEC inlet, Schurter 2573 IEC power socket, Schurter 2573 mains inlet, Schurter 2573 power entry module, Schurter 2573 panel mount power connector
- Model id:
iec-inlets-schurter-2573
- Standard: IEC 60320 power inlet · size Schurter 2573
Files
| Part key | Simplified |
|---|
iec-inlets-schurter-2573 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| wf | Flange width | | 34.3 | | 34.3 | nominal | L2 |
| hf | Flange height | | 15 | | 15 | nominal | L2 |
| tf | Flange thickness | | 4 | | 4 | nominal | L2 |
| rf | Flange corner radius | | 3 | | 3 | nominal | L2 |
| wa | Front face width | | 20.5 | | 20.5 | nominal | L2 |
| ha | Front face height | | 11.9 | | 11.9 | nominal | L2 |
| es | Front face projection | | 5.5 | | 5.5 | nominal | L2 |
| p | Mounting hole pitch | | 28 | | 28 | nominal | L2 |
| dh | Mounting hole diameter | | 3.2 | | 3.2 | nominal | L2 |
| wb | Body width | | 20.2 | | 20.2 | nominal | L2 |
| hb | Body height | | 11.4 | | 11.4 | nominal | L2 |
| lb | Body depth | | 8.6 | | 8.6 | nominal | L2 |
| Es | Terminal length, solder | | 11 | | 11 | nominal | L2 |
| Eq | Terminal length, quick connect | | 17 | | 17 | nominal | L2 |
| Ld | Depth as drawn | | 20.4 | | 20.4 | nominal | L2 |
| zs | Body step | | 3 | | 3 | nominal | L2 |
| cw | Cutout width | | 20.4 | | 20.4 | nominal | L2 |
| ch | Cutout height | | 11.6 | | 11.6 | nominal | L2 |
| cr | Cutout corner radius | | | 4 | 4 | single limit (max), modeled at the limit | L2 |
| cp | Cutout hole pitch | | 28 | | 28 | nominal | L2 |
| cd | Cutout hole diameter | | 3.2 | | 3.2 | nominal | L2 |
| cm | Cutout hole thread | | 3 | | 3 | nominal | L2 |
Drawing

As a PDF: CC-IECINLET-SZ-schurter-2573.pdf.
The Schurter 2573 power inlet beside the Schurter DD11
The Schurter 2573 is the last of the 5 IEC 60320 power inlets published here, listed from Schurter 6100-3 to Schurter 2573.
- Flange width (wf): 34.3 mm on the Schurter 2573 power inlet, against 65 mm on the Schurter DD11.
- Flange height (hf): 15 mm on the Schurter 2573 power inlet, against 30.5 mm on the Schurter DD11.
- Front face width (wa): 20.5 mm on the Schurter 2573 power inlet, against 46.7 mm on the Schurter DD11.
- Front face height (ha): 11.9 mm on the Schurter 2573 power inlet, against 27.7 mm on the Schurter DD11.
- Front face projection (es): 5.5 mm on the Schurter 2573 power inlet, against 2.5 mm on the Schurter DD11.
- Mounting hole pitch (p): 28 mm on the Schurter 2573 power inlet, against 56 mm on the Schurter DD11.
Other sizes
Conventions
- Simplified only: the moulded body and its metal contacts as separate solids. STEP AP214, millimetres, the flange's back face at z = 0, the front face toward +Z.
- The panel cutout and panel thickness are the maker's own, given as reference data on the page and drawing; they are not modeled.
Documents
Sources
schurter-2573. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...