R 1 Pipe Plug, DIN 906

A 12 mm long R 1 pipe plug (DIN 906) that sits flush in a tapered port, turned with a 17 mm hex key in a socket at least 6 mm deep. It comes in simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: R 1 pipe plug
• Model id: din906-r1
• Standard: DIN 906:2020-02 · R 1, pitch 2.309 mm, R taper pipe thread (ISO 7-1), 55 degree profile, 1:16 taper, right hand

Files

Part key	Simplified	Threaded
din906-r1	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
L	Length		12		12	nominal	L1
s	Socket width across flats	17.05	17	17.23	17.14	midpoint of min–max	L0 (min, max: one source)
t1	Socket depth	6			6	single limit (min), modeled at the limit	L1
n	Threads per inch		11		11	nominal	L2
P	Pitch		2.309		2.309	nominal	L2
h	Thread height		1.479		1.479	nominal	L2
d	Major diameter (gauge diameter)		33.249		33.249	nominal	L2
d2	Pitch diameter		31.77		31.77	nominal	L2
d1	Minor diameter		30.291		30.291	nominal	L2
a	Gauge length		10.4		10.4	nominal	L1
alpha	Flank angle		55		55	nominal	L1
taper	Taper		16		16	nominal	L1

Drawing

As a PDF: CC-DIN906-SZ-1.pdf.

The R 1 pipe plug beside the R 3/4 and the R 1-1/4

The R 1 is number 6 of the 8 DIN 906 pipe plugs published here, listed from R 1/8 to R 1-1/2.

• Length (L): 12 mm on the R 1 pipe plug, against 12 mm on the R 3/4 and 18 mm on the R 1-1/4.
• Socket width across flats (s): 17 mm on the R 1 pipe plug, against 12 mm on the R 3/4 and 22 mm on the R 1-1/4.
• Socket depth (t1): at least 6 mm on the R 1 pipe plug, against at least 6 mm on the R 3/4 and at least 11.5 mm on the R 1-1/4.
• Threads per inch (n): 11 mm on the R 1 pipe plug, against 14 mm on the R 3/4 and 11 mm on the R 1-1/4.
• Pitch (P): 2.309 mm on the R 1 pipe plug, against 1.814 mm on the R 3/4 and 2.309 mm on the R 1-1/4.
• Thread height (h): 1.479 mm on the R 1 pipe plug, against 1.162 mm on the R 3/4 and 1.479 mm on the R 1-1/4.
• Major diameter (gauge diameter) (d): 33.249 mm on the R 1 pipe plug, against 26.441 mm on the R 3/4 and 41.91 mm on the R 1-1/4.
• Pitch diameter (d2): 31.77 mm on the R 1 pipe plug, against 25.279 mm on the R 3/4 and 40.431 mm on the R 1-1/4.

Other sizes

• One size smaller: R 3/4 Pipe Plug, DIN 906, 12 mm hex key, length 12 mm.
• One size larger: R 1-1/4 Pipe Plug, DIN 906, 22 mm hex key, length 18 mm.

Documents

• CC-DIN906-DS-R1.pdf: 1 datasheet: values with levels, sources
• CC-DIN906-SZ-1.pdf: 1 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

etb-iso7-1, fasten-it-din906, gewinde-normen-bspt, iso228-1-2000-sample, torqbolt-din906, wikipedia-bsp. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.