IEC 60320 power inlet, per maker part number, schurter-2573
Size drawing - schurter-2573 values on the views - enlarged 2.5:1
Sym. Dimensi schurter-2573
wt Flange width 34.3 hf Flange height 15
tf Flange thickness 4 pf Flange corner radius 3 wa Front face width ha Front face height
es Front face projection
p Mounting hole pitch dh Mounting hole diameter
wb Body width
hb Body height Lb Body depth
Es Terminal length, solder Eq Terminal length, quick connect
Ld Depth as drawn (2573, recorded)
zs Body step (2573, recorded) cw Cutout width, front mounting ch Cutout height, front mounting cr Cutout corner radius
cp Cutout hole pitch
cd Cutout hole diameter
cm Cutout hole thread
;
Panel cutout, front mounting (the maker's reference, not modeled)
: Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 22. Notes A dash: that maker's drawing doesn't state it. Panel cutouts and thicknesses: the maker's reference, not modeled. Coupler face, pins, latches, rocker and drawer illustrative: sheet DO2.
cw = 20.4
TITLE
'? CommunityCAD Size drawing, schurter-2573
STANDARDS FOLLOWED FAMILY / DETAIL No published standard: each maker's own drawing IEC 60320 power inlet - schurter-2573
SHEET REV SCALE PROJECTION UNITS
CC-IECINLET-SZ-schurter-2573]A 2.5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
