Rigid Clamp Shaft Coupling, Ruland MCLX-5-5

STL Supports CommunityCAD0 downloads
Rigid Clamp Shaft Coupling, Ruland MCLX-5-5
1 / 6

Rigid Clamp Shaft Coupling, Ruland MCLX-5-5

The Ruland MCLX-5-5 shaft coupling: outside diameter 15 mm, overall length 22 mm, small bore 5 mm. Available as simplified STEP files.

Ruland MCLX-5-5 shaft coupling, Shaft coupling

This model is CommunityCAD's own, drawn from Ruland's published drawing; Ruland did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Ruland MCLX-5-5 shaft coupler, Ruland MCLX-5-5 motor coupler, Ruland MCLX-5-5 beam coupling, Ruland MCLX-5-5 flexible coupling, Ruland MCLX-5-5 rigid coupling
  • Model id: shaft-couplers-ruland-mclx-5-5
  • Standard: Shaft coupling · size Ruland MCLX-5-5

Files

Part keySimplified
shaft-couplers-ruland-mclx-5-5STEP

Dimensions

Dimension symbols for Ruland MCLX-5-5 shaft couplings (Shaft coupling)

SymbolNameminnommaxModeledRuleLevel
DOutside diameter1515nominalL2
LOverall length2222nominalL2
d1Small bore55nominalL2
d2Large bore55nominalL2
MClamp screw thread22nominalL2
nNumber of clamp screws44nominalL2
sClamp screw offset4.64.6nominalL2
CClearance diameter1515single limit (max), modeled at the limitL2

Drawing

Drawing of the Ruland MCLX-5-5 shaft coupling with its values (Shaft coupling)

As a PDF: CC-COUPLER-SZ-ruland-mclx-5-5.pdf.

The Ruland MCLX-5-5 shaft coupling beside the Ruland MCLX-8-8

The Ruland MCLX-5-5 is the first of the 11 Shaft couplings published here, listed from Ruland MCLX-5-5 to Misumi CPRC20-8-8.

  • Outside diameter (D): 15 mm on the Ruland MCLX-5-5 shaft coupling, against 24 mm on the Ruland MCLX-8-8.
  • Overall length (L): 22 mm on the Ruland MCLX-5-5 shaft coupling, against 35 mm on the Ruland MCLX-8-8.
  • Small bore (d1): 5 mm on the Ruland MCLX-5-5 shaft coupling, against 8 mm on the Ruland MCLX-8-8.
  • Large bore (d2): 5 mm on the Ruland MCLX-5-5 shaft coupling, against 8 mm on the Ruland MCLX-8-8.
  • Clamp screw thread (M): 2 mm on the Ruland MCLX-5-5 shaft coupling, against 3 mm on the Ruland MCLX-8-8.
  • Clamp screw offset (s): 4.6 mm on the Ruland MCLX-5-5 shaft coupling, against 9 mm on the Ruland MCLX-8-8.
  • Clearance diameter (C): up to 15 mm on the Ruland MCLX-5-5 shaft coupling, against up to 27.1 mm on the Ruland MCLX-8-8.

Other sizes

Conventions

  • Simplified only: the coupler body and its clamp screws as separate solids. STEP AP214, millimetres, the bores on Z, the small bore's end face at z = 0.
  • Illustrative, not dimensioned by the maker: the chamfers, the slits' widths where not given, the screw pockets, the screws' lengths, Ruland's screw places, the PCMR hubs and helical beams, and the CPLCN flexure slits.

Documents

Sources

ruland-mclx-5-5-a, ruland-rigid-metric. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...