C14 Power Entry Module, Switch and Fuse, Schurter DD11
The Schurter DD11 power inlet (IEC 60320 power inlet): flange width 65 mm, flange height 30.5 mm, front face width 46.7 mm. Available as simplified STEP files.

This model is CommunityCAD's own, drawn from SCHURTER's published drawing; SCHURTER did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: Schurter DD11 IEC inlet, Schurter DD11 IEC power socket, Schurter DD11 mains inlet, Schurter DD11 power entry module, Schurter DD11 panel mount power connector
- Model id:
iec-inlets-schurter-dd11
- Standard: IEC 60320 power inlet · size Schurter DD11
Files
| Part key | Simplified |
|---|
iec-inlets-schurter-dd11 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| wf | Flange width | | 65 | | 65 | nominal | L2 |
| hf | Flange height | | 30.5 | | 30.5 | nominal | L2 |
| wa | Front face width | | 46.7 | | 46.7 | nominal | L2 |
| ha | Front face height | | 27.7 | | 27.7 | nominal | L2 |
| ef | Front height | | 5 | | 5 | nominal | L2 |
| es | Front face projection | | 2.5 | | 2.5 | nominal | L2 |
| xc | Inlet offset | | 10.3 | | 10.3 | nominal | L2 |
| p | Mounting hole pitch | | 56 | | 56 | nominal | L2 |
| dh | Mounting hole diameter | | 3.25 | | 3.25 | nominal | L2 |
| ak | Countersink angle | | 90 | | 90 | nominal | L2 |
| wb | Body width | | 46.6 | | 46.6 | nominal | L2 |
| hb | Body height | | 27.1 | | 27.1 | nominal | L2 |
| lb | Body depth | | 30 | | 30 | nominal | L2 |
| lv | Cover depth | | 33.1 | | 33.1 | nominal | L2 |
| lw | Housing depth without the cover | | 31.5 | | 31.5 | nominal | L2 |
| wv | Cover step width | | 31.6 | | 31.6 | nominal | L2 |
| lvs | Cover step depth | | 22.9 | | 22.9 | nominal | L2 |
| hv | Cover pin height | | 4 | | 4 | nominal | L2 |
| xpe | Earth terminal station | | 10.6 | | 10.6 | nominal | L2 |
| xn | Neutral terminal station | | 29.8 | | 29.8 | nominal | L2 |
| pnl | Line terminal pitch | | 6 | | 6 | nominal | L2 |
| cw | Cutout width | | 47.1 | | 47.1 | nominal | L2 |
| ch | Cutout height | | 28.1 | | 28.1 | nominal | L2 |
| cr | Cutout corner radius | | 1 | | 1 | nominal | L2 |
| cp | Cutout hole pitch | | 56 | | 56 | nominal | L2 |
| cd | Cutout hole diameter | | 3.4 | | 3.4 | nominal | L2 |
| smax | Panel thickness, greatest | | | 8 | 8 | single limit (max), modeled at the limit | L2 |
Drawing

As a PDF: CC-IECINLET-SZ-schurter-dd11.pdf.
The Schurter DD11 power inlet beside the Schurter 6100-4 and the Schurter 2573
The Schurter DD11 is number 4 of the 5 IEC 60320 power inlets published here, listed from Schurter 6100-3 to Schurter 2573.
- Flange width (wf): 65 mm on the Schurter DD11 power inlet, against 30 mm on the Schurter 6100-4 and 34.3 mm on the Schurter 2573.
- Flange height (hf): 30.5 mm on the Schurter DD11 power inlet, against 23 mm on the Schurter 6100-4 and 15 mm on the Schurter 2573.
- Front face width (wa): 46.7 mm on the Schurter DD11 power inlet, against 20.5 mm on the Schurter 2573.
- Front face height (ha): 27.7 mm on the Schurter DD11 power inlet, against 11.9 mm on the Schurter 2573.
- Front face projection (es): 2.5 mm on the Schurter DD11 power inlet, against 5.5 mm on the Schurter 2573.
- Mounting hole pitch (p): 56 mm on the Schurter DD11 power inlet, against 28 mm on the Schurter 2573.
Other sizes
Conventions
- Simplified only: the moulded body and its metal contacts as separate solids. STEP AP214, millimetres, the flange's back face at z = 0, the front face toward +Z.
- The panel cutout and panel thickness are the maker's own, given as reference data on the page and drawing; they are not modeled.
Documents
Sources
schurter-dd11. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...