C14 Power Entry Module, Switch and Fuse, Schurter DD11

STEP · STL Supports CommunityCAD2 downloads
C14 Power Entry Module, Switch and Fuse, Schurter DD11
1 / 6

C14 Power Entry Module, Switch and Fuse, Schurter DD11

The Schurter DD11 power inlet (IEC 60320 power inlet): flange width 65 mm, flange height 30.5 mm, front face width 46.7 mm. Available as simplified STEP files.

Schurter DD11 power inlet, IEC 60320 power inlet

This model is CommunityCAD's own, drawn from SCHURTER's published drawing; SCHURTER did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Schurter DD11 IEC inlet, Schurter DD11 IEC power socket, Schurter DD11 mains inlet, Schurter DD11 power entry module, Schurter DD11 panel mount power connector
  • Model id: iec-inlets-schurter-dd11
  • Standard: IEC 60320 power inlet · size Schurter DD11

Files

Part keySimplified
iec-inlets-schurter-dd11STEP

Dimensions

Dimension symbols for Schurter DD11 power inlets (IEC 60320 power inlet)

SymbolNameminnommaxModeledRuleLevel
wfFlange width6565nominalL2
hfFlange height30.530.5nominalL2
waFront face width46.746.7nominalL2
haFront face height27.727.7nominalL2
efFront height55nominalL2
esFront face projection2.52.5nominalL2
xcInlet offset10.310.3nominalL2
pMounting hole pitch5656nominalL2
dhMounting hole diameter3.253.25nominalL2
akCountersink angle9090nominalL2
wbBody width46.646.6nominalL2
hbBody height27.127.1nominalL2
lbBody depth3030nominalL2
lvCover depth33.133.1nominalL2
lwHousing depth without the cover31.531.5nominalL2
wvCover step width31.631.6nominalL2
lvsCover step depth22.922.9nominalL2
hvCover pin height44nominalL2
xpeEarth terminal station10.610.6nominalL2
xnNeutral terminal station29.829.8nominalL2
pnlLine terminal pitch66nominalL2
cwCutout width47.147.1nominalL2
chCutout height28.128.1nominalL2
crCutout corner radius11nominalL2
cpCutout hole pitch5656nominalL2
cdCutout hole diameter3.43.4nominalL2
smaxPanel thickness, greatest88single limit (max), modeled at the limitL2

Drawing

Drawing of the Schurter DD11 power inlet with its values (IEC 60320 power inlet)

As a PDF: CC-IECINLET-SZ-schurter-dd11.pdf.

The Schurter DD11 power inlet beside the Schurter 6100-4 and the Schurter 2573

The Schurter DD11 is number 4 of the 5 IEC 60320 power inlets published here, listed from Schurter 6100-3 to Schurter 2573.

  • Flange width (wf): 65 mm on the Schurter DD11 power inlet, against 30 mm on the Schurter 6100-4 and 34.3 mm on the Schurter 2573.
  • Flange height (hf): 30.5 mm on the Schurter DD11 power inlet, against 23 mm on the Schurter 6100-4 and 15 mm on the Schurter 2573.
  • Front face width (wa): 46.7 mm on the Schurter DD11 power inlet, against 20.5 mm on the Schurter 2573.
  • Front face height (ha): 27.7 mm on the Schurter DD11 power inlet, against 11.9 mm on the Schurter 2573.
  • Front face projection (es): 2.5 mm on the Schurter DD11 power inlet, against 5.5 mm on the Schurter 2573.
  • Mounting hole pitch (p): 56 mm on the Schurter DD11 power inlet, against 28 mm on the Schurter 2573.

Other sizes

Conventions

  • Simplified only: the moulded body and its metal contacts as separate solids. STEP AP214, millimetres, the flange's back face at z = 0, the front face toward +Z.
  • The panel cutout and panel thickness are the maker's own, given as reference data on the page and drawing; they are not modeled.

Documents

Sources

schurter-dd11. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-IECINLET-DS-SCHURTER-DD11.pdf

CC-IECINLET-DS-schurter-dd11 rev A Size datasheet - schurter-dd11 '?) CommunityCAD Schurter DD11 power entry module Size datasheet: this size's values with their levels, conventions and sources. For panel mounting: takes a C13 cord ©| ©) Part key iec-inlets-schurter-dd11 Files 1 STEP AP214…

View full datasheet →

docs/CC-IECINLET-SZ-schurter-dd11.pdf

IEC 60320 power inlet, per maker part number, schurter-dd11 Size drawing - schurter-dd11 values on the views - scale 1:1 [L : cw = 47.1 Panel cutout, front mounting (the maker's reference, not modeled) @dh = 3.25, ak = 90° Sym. wt hf wa ha ef es xc p dh ak wb hb Lb lv ‘lw wv Dimensi Flange width…

View full datasheet →