CC-IECINLET-DS-schurter-2573 revA Size datasheet - schurter-2573
'?) CommunityCAD
Schurter 2573 C8 power inlet
Size datasheet: this size's values with their levels, conventions and sources.
For panel mounting: takes a C7 cord oO oO Part key iec-inlets-schurter-2573 Files 1 STEP AP214 (simplified)
schurter-2573, front, 1:1 schurter-2573, side, 0.75:1 (hidden lines dashed)
Sym. Dimension Value wt Flange width 34. hf Flange height tf Flange thickness pt Flange corner radius wa Front face width 20.5 ha Front face height 11.9 es Front face projection 5.5 p Mounting hole pitch dh Mounting hole diameter 3.2 wb Body width 20. hb Body height 11. Lb Body depth Bo Es Terminal length, solder 11. Eq Terminal length, quick connect AN/o Ld Depth as drawn (2573, recorded) 20. zs Body step (2573, recorded) cw Cutout width, front mounting 20. ch Cutout height, front mounting lil,
Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard: each maker's own drawing
IEC 60320 power inlet - schurter-2573 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec 3c4229b833a653b73db51178a38d40486ee7c36b
---
. CC-IECINLET-DS-schurter-2573 revA '?) CommunityCAD Size datasheet - schurter-2573
Dimensions (continued)
Dimension
er Cutout corner radius <4 cp Cutout hole pitch 28 cd Cutout hole diameter 3.2 cm Cutout hole thread 3
Conventions
« Each part its maker's drawing: No published standard for the body, flange, holes or panel cutout: every value is that part's maker drawing (L2, one lineage), CommunityCAD's model of it, not a Schurter or Qualtek file. IEC 60320-3 fixes only the coupler face and is paid.
e Panel cutouts are reference data: The panel cutout (front mounting, and rear mounting where the maker draws one) and panel thickness are the maker's own, on this page as reference; they are not modeled and aren't a shared "C14 cutout".
« Frame: The flange's back face (the panel's front face) at z = 0, the front face toward +Z, the body toward -Z, the mounting holes on X; the C14's earth pin toward +Y (DD11: toward +X, as Schurter draws it).
e Coupler opening and pins: Illustrative: the coupler opening's shape and depth and its pins (Qualtek's opening size where given), the flange outline between the drawn extents, the body's depth where only E is given, DD11's countersink diameter, rocker and fuse drawer, 6100-4's latches, the corner rounds and the terminal tabs.
¢ Terminals: Schurter's quick-connect variant (Eq) is modeled; its solder variant (Es) is recorded. Qualtek's solder pins as its drawing shows them.
Sources Source Publisher Retrieved sha256 schurter-2573 SCHURTER AG 2026-11-07 ccéfbe2cfcab (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-IECINLET-DS.
No published standard: each maker's own drawing Page 2/2 IEC 60320 power inlet - schurter-2573 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
