C14 Power Inlet, Countersunk Screw Mount, Qualtek 703W-00/08
The Qualtek 703W-00/08 power inlet (IEC 60320 power inlet): flange width 49.5 mm, flange thickness 3.2 mm, flange lobe radius 6 mm. Available as simplified STEP files.

This model is CommunityCAD's own, drawn from Qualtek's published drawing; Qualtek did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: Qualtek 703W-00/08 IEC inlet, Qualtek 703W-00/08 IEC power socket, Qualtek 703W-00/08 mains inlet, Qualtek 703W-00/08 power entry module, Qualtek 703W-00/08 panel mount power connector
- Model id:
iec-inlets-qualtek-703w-00-08
- Standard: IEC 60320 power inlet · size Qualtek 703W-00/08
Files
| Part key | Simplified |
|---|
iec-inlets-qualtek-703w-00-08 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| wf | Flange width | | 49.5 | | 49.5 | nominal | L2 |
| tf | Flange thickness | | 3.2 | | 3.2 | nominal | L2 |
| rl | Flange lobe radius | | 6 | | 6 | nominal | L2 |
| wa | Front face width | | 30 | | 30 | nominal | L2 |
| ha | Front face height | | 22 | | 22 | nominal | L2 |
| ra | Front face corner radius | | 5 | | 5 | nominal | L2 |
| wr | Coupler opening width | | 24 | | 24 | nominal | L2 |
| hr | Coupler opening height | | 16 | | 16 | nominal | L2 |
| ef | Front height | | 6 | | 6 | nominal | L2 |
| p | Mounting hole pitch | | 40 | | 40 | nominal | L2 |
| dh | Mounting hole diameter | | 3.4 | | 3.4 | nominal | L2 |
| dk | Countersink diameter | | 6 | | 6 | nominal | L2 |
| wb | Body width | | 27 | | 27 | nominal | L2 |
| hb | Body height | | 19.2 | | 19.2 | nominal | L2 |
| rb | Body corner radius | | 4 | | 4 | nominal | L2 |
| lb | Body depth | | 12.7 | | 12.7 | nominal | L2 |
| lt | Terminal block depth | | 13.7 | | 13.7 | nominal | L2 |
| tt | Terminal thickness | | 0.8 | | 0.8 | nominal | L2 |
| cw | Cutout width | | 28 | | 28 | nominal | L2 |
| ch | Cutout height | | 20 | | 20 | nominal | L2 |
| cr | Cutout corner radius | | 4 | | 4 | nominal | L2 |
| cc | Cutout chamfer | | 5 | | 5 | nominal | L2 |
| cp | Cutout hole pitch | | 40 | | 40 | nominal | L2 |
| cd | Cutout hole diameter | | 3.4 | | 3.4 | nominal | L2 |
| rw | Rear-mounting cutout width | | 30.3 | | 30.3 | nominal | L2 |
| rh | Rear-mounting cutout height | | 22.3 | | 22.3 | nominal | L2 |
| rr | Rear-mounting cutout corner radius | | 5 | | 5 | nominal | L2 |
| rp | Rear-mounting hole pitch | | 40 | | 40 | nominal | L2 |
| rd | Rear-mounting hole diameter | | 3.4 | | 3.4 | nominal | L2 |
Drawing

As a PDF: CC-IECINLET-SZ-qualtek-703w-00-08.pdf.
The Qualtek 703W-00/08 power inlet beside the Schurter 6100-3 and the Schurter 6100-4
The Qualtek 703W-00/08 is number 2 of the 5 IEC 60320 power inlets published here, listed from Schurter 6100-3 to Schurter 2573.
- Flange width (wf): 49.5 mm on the Qualtek 703W-00/08 power inlet, against 48 mm on the Schurter 6100-3 and 30 mm on the Schurter 6100-4.
- Flange thickness (tf): 3.2 mm on the Qualtek 703W-00/08 power inlet, against 3 mm on the Schurter 6100-4.
- Front face width (wa): 30 mm on the Qualtek 703W-00/08 power inlet, against 28 mm on the Schurter 6100-3.
- Front face height (ha): 22 mm on the Qualtek 703W-00/08 power inlet, against 20.5 mm on the Schurter 6100-3.
Other sizes
Conventions
- Simplified only: the moulded body and its metal contacts as separate solids. STEP AP214, millimetres, the flange's back face at z = 0, the front face toward +Z.
- The panel cutout and panel thickness are the maker's own, given as reference data on the page and drawing; they are not modeled.
Documents
Sources
qualtek-703w-00-08, qualtek-703w-00-08-figures. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...