C14 Power Inlet, Snap-In, Schurter 6100-4
The Schurter 6100-4 power inlet (IEC 60320 power inlet): flange width 30 mm, flange height 23 mm, flange thickness 3 mm. Available as simplified STEP files.

This model is CommunityCAD's own, drawn from SCHURTER's published drawing; SCHURTER did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: Schurter 6100-4 IEC inlet, Schurter 6100-4 IEC power socket, Schurter 6100-4 mains inlet, Schurter 6100-4 power entry module, Schurter 6100-4 panel mount power connector
- Model id:
iec-inlets-schurter-6100-4
- Standard: IEC 60320 power inlet · size Schurter 6100-4
Files
| Part key | Simplified |
|---|
iec-inlets-schurter-6100-4 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| wf | Flange width | | 30 | | 30 | nominal | L2 |
| hf | Flange height | | 23 | | 23 | nominal | L2 |
| tf | Flange thickness | | 3 | | 3 | nominal | L2 |
| wb | Body width | | 27.5 | | 27.5 | nominal | L2 |
| hb | Body height | | 20 | | 20 | nominal | L2 |
| Es | Terminal length, solder | | 22.5 | | 22.5 | nominal | L2 |
| Eq | Terminal length, quick connect | | 25.5 | | 25.5 | nominal | L2 |
| cw | Cutout width | | 27.5 | | 27.5 | nominal | L2 |
| ch | Cutout height | | 20 | | 20 | nominal | L2 |
| cr | Cutout corner radius | | | 3 | 3 | single limit (max), modeled at the limit | L2 |
| smin | Panel thickness, least | | 1 | | 1 | nominal | L2 |
| smax | Panel thickness, greatest | | 3 | | 3 | nominal | L2 |
Drawing

As a PDF: CC-IECINLET-SZ-schurter-6100-4.pdf.
The Schurter 6100-4 power inlet beside the Qualtek 703W-00/08 and the Schurter DD11
The Schurter 6100-4 is number 3 of the 5 IEC 60320 power inlets published here, listed from Schurter 6100-3 to Schurter 2573.
- Flange width (wf): 30 mm on the Schurter 6100-4 power inlet, against 49.5 mm on the Qualtek 703W-00/08 and 65 mm on the Schurter DD11.
- Flange height (hf): 23 mm on the Schurter 6100-4 power inlet, against 30.5 mm on the Schurter DD11.
- Flange thickness (tf): 3 mm on the Schurter 6100-4 power inlet, against 3.2 mm on the Qualtek 703W-00/08.
- Body width (wb): 27.5 mm on the Schurter 6100-4 power inlet, against 27 mm on the Qualtek 703W-00/08 and 46.6 mm on the Schurter DD11.
- Body height (hb): 20 mm on the Schurter 6100-4 power inlet, against 19.2 mm on the Qualtek 703W-00/08 and 27.1 mm on the Schurter DD11.
- Cutout width (cw): 27.5 mm on the Schurter 6100-4 power inlet, against 28 mm on the Qualtek 703W-00/08 and 47.1 mm on the Schurter DD11.
Other sizes
Conventions
- Simplified only: the moulded body and its metal contacts as separate solids. STEP AP214, millimetres, the flange's back face at z = 0, the front face toward +Z.
- The panel cutout and panel thickness are the maker's own, given as reference data on the page and drawing; they are not modeled.
Documents
Sources
schurter-6100-4. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...