M4 Countersunk Socket Screw, ISO 10642
Driven with a 2.5 mm hex key, the M4 countersunk socket screw (ISO 10642) has a head 7.53 to 7.96 mm across and 2.121 to 2.48 mm tall. Its M4 × 0.7 thread comes in 8 lengths from 10 to 40 mm, each as simplified and threaded STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: M4 flat head Allen bolt, M4 flat head socket cap screw, M4 countersunk Allen screw, M4 x 10 to M4 x 40
- Model id:
iso10642-m4
- Standard: ISO 10642:2026 · thread M4 × 0.7, ISO metric coarse, right hand
Lengths
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| P | Thread pitch | | 0.7 | | 0.7 | nominal | L1 |
| b | Thread length | | 20 ref | | 20 | reference value | L1 |
| dk_theo | Head diameter, theoretical | | | 8.96 | 8.96 | single limit (max), modeled at the limit | L1 |
| dk | Head diameter, actual | 7.53 | | 7.96 | 7.53 | modeled at the min (the max has one source) | L1 |
| ds | Shank diameter | 3.82 | | 4 | 3.91 | midpoint of min–max | L1 |
| e | Socket width across corners | 2.873 | | | 2.873 | single limit (min), modeled at the limit | L1 |
| k | Head height | 2.121 | | 2.48 | 2.48 | modeled at the max (the min has one source) | L1 |
| r | Underhead fillet radius | 0.2 | | | 0.2 | single limit (min), modeled at the limit | L1 |
| s | Socket width across flats | 2.52 | 2.5 | 2.58 | 2.55 | midpoint of min–max | L1 |
| t | Socket depth | 1.4 | | 1.65 | 1.4 | modeled at the min (the max has one source) | L1 |
| alpha | Head angle | 90 | | 92 | 90 | modeled at the min (the max has one source) | L1 |
| P | Coarse thread pitch | | 0.7 | | 0.7 | nominal | L1 |
| tap_drill | Tap drill diameter | | 3.3 | | 3.3 | nominal | L1 |
| d1 | Basic minor diameter | | 3.2422276 | | 3.2422276 | nominal | L1 |
| ch_angle | Chamfered end angle | | | 50 | 50 | single limit (max), modeled at the limit | L2 |
| dh_fine | Clearance hole, fine series | | 4.3 | | 4.3 | nominal | L1 |
| dh_medium | Clearance hole, medium series | | 4.5 | | 4.5 | nominal | L1 |
| dh_coarse | Clearance hole, coarse series | | 4.8 | | 4.8 | nominal | L1 |
Thread and holes
- Tap drill: 3.3 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
- Clearance hole (ISO 273): close 4.3, normal 4.5, loose 4.8 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).
Drawing

As a PDF: CC-ISO10642-SZ-M4.pdf.
Goes with the M4 countersunk socket screw
- Hex key: 2.5 mm, the socket's nominal width across flats (s) in the table above.
- ISO 4032 hex nut, the same size as this M4 countersunk socket screw: M4 Hex Nut, ISO 4032 / DIN 934
- ISO 7089 flat washer, the same size as this M4 countersunk socket screw: M4 Flat Washer, ISO 7089
The M4 countersunk socket screw beside the M3 and the M5
The M4 is number 2, counting from the smallest, of the 5 ISO 10642 countersunk socket screws published here, from M3 to M8.
- Thread pitch (P): 0.7 mm on the M4 countersunk socket screw, against 0.5 mm on the M3 and 0.8 mm on the M5.
- Thread length (b): 20 mm (reference) on the M4 countersunk socket screw, against 18 mm (reference) on the M3 and 22 mm (reference) on the M5.
- Head diameter, theoretical (dk_theo): up to 8.96 mm on the M4 countersunk socket screw, against up to 6.72 mm on the M3 and up to 11.2 mm on the M5.
- Head diameter, actual (dk): 7.53 to 7.96 mm on the M4 countersunk socket screw, against 5.54 to 5.81 mm on the M3 and 9.43 to 10.07 mm on the M5.
- Shank diameter (ds): 3.82 to 4 mm on the M4 countersunk socket screw, against 2.86 to 3 mm on the M3 and 4.82 to 5 mm on the M5.
- Socket width across corners (e): at least 2.873 mm on the M4 countersunk socket screw, against at least 2.303 mm on the M3 and at least 3.443 mm on the M5.
- Head height (k): 2.121 to 2.48 mm on the M4 countersunk socket screw, against 1.522 to 1.86 mm on the M3 and 2.669 to 3.1 mm on the M5.
- Underhead fillet radius (r): at least 0.2 mm on the M4 countersunk socket screw, against at least 0.1 mm on the M3 and at least 0.2 mm on the M5.
Other sizes
Conventions
- Simplified: plain shank at the nominal diameter, light for assemblies. Threaded: the ISO 68-1 thread, for close-ups and renders.
- Values given only as a limit are modeled at that limit.
- Head: a 90-degree cone (the lower limit of the one-sided head angle) laid out from the theoretical head diameter at the top face, cut by a cylindrical land at the actual head diameter (its minimum), sharp edges.
Documents
Sources
albany-clearance, amesweb-tap-drill, engineersedge-iso10642, fasten-it-iso10642, globalfastener-iso10642, globalfastener-iso10642-2026-drawing, globalfastener-iso10642-2026-lengths, iso4753-2011-sample, rule-basic-minor, rule-tap-drill, westfield-iso10642, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...