M8 Countersunk Socket Screw, ISO 10642
Driven with a 5 mm hex key, the M8 countersunk socket screw (ISO 10642) has a head 15.24 to 16.43 mm across and 4.366 to 4.96 mm tall. Its M8 × 1.25 thread comes in 13 lengths from 16 to 80 mm, each as simplified and threaded STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: M8 flat head Allen bolt, M8 flat head socket cap screw, M8 countersunk Allen screw, M8 x 16 to M8 x 80
- Model id:
iso10642-m8
- Standard: ISO 10642:2026 · thread M8 × 1.25, ISO metric coarse, right hand
Lengths
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| P | Thread pitch | | 1.25 | | 1.25 | nominal | L1 |
| b | Thread length | | 28 ref | | 28 | reference value | L1 |
| dk_theo | Head diameter, theoretical | | | 17.92 | 17.92 | single limit (max), modeled at the limit | L1 |
| dk | Head diameter, actual | 15.24 | | 16.43 | 15.24 | modeled at the min (the max has one source) | L1 |
| ds | Shank diameter | 7.78 | | 8 | 7.89 | midpoint of min–max | L1 |
| e | Socket width across corners | 5.723 | | | 5.723 | single limit (min), modeled at the limit | L1 |
| k | Head height | 4.366 | | 4.96 | 4.96 | modeled at the max (the min has one source) | L1 |
| r | Underhead fillet radius | 0.4 | | | 0.4 | single limit (min), modeled at the limit | L1 |
| s | Socket width across flats | 5.02 | 5 | 5.14 | 5.08 | midpoint of min–max | L1 |
| t | Socket depth | 2.9 | | 3.2 | 2.9 | modeled at the min (the max has one source) | L1 |
| alpha | Head angle | 90 | | 92 | 90 | modeled at the min (the max has one source) | L1 |
| P | Coarse thread pitch | | 1.25 | | 1.25 | nominal | L1 |
| tap_drill | Tap drill diameter | | 6.75 | | 6.75 | nominal | L1 |
| d1 | Basic minor diameter | | 6.646835 | | 6.646835 | nominal | L1 |
| ch_angle | Chamfered end angle | | | 50 | 50 | single limit (max), modeled at the limit | L2 |
| dh_fine | Clearance hole, fine series | | 8.4 | | 8.4 | nominal | L1 |
| dh_medium | Clearance hole, medium series | | 9 | | 9 | nominal | L1 |
| dh_coarse | Clearance hole, coarse series | | 10 | | 10 | nominal | L1 |
Thread and holes
- Tap drill: 6.75 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
- Clearance hole (ISO 273): close 8.4, normal 9, loose 10 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).
Drawing

As a PDF: CC-ISO10642-SZ-M8.pdf.
Goes with the M8 countersunk socket screw
- Hex key: 5 mm, the socket's nominal width across flats (s) in the table above.
- ISO 4032 hex nut, the same size as this M8 countersunk socket screw: M8 Hex Nut, ISO 4032 / DIN 934
- ISO 7089 flat washer, the same size as this M8 countersunk socket screw: M8 Flat Washer, ISO 7089
The M8 countersunk socket screw beside the M6
The M8 is the largest of the 5 ISO 10642 countersunk socket screws published here, from M3 to M8.
- Thread pitch (P): 1.25 mm on the M8 countersunk socket screw, against 1 mm on the M6.
- Thread length (b): 28 mm (reference) on the M8 countersunk socket screw, against 24 mm (reference) on the M6.
- Head diameter, theoretical (dk_theo): up to 17.92 mm on the M8 countersunk socket screw, against up to 13.44 mm on the M6.
- Head diameter, actual (dk): 15.24 to 16.43 mm on the M8 countersunk socket screw, against 11.34 to 12.16 mm on the M6.
- Shank diameter (ds): 7.78 to 8 mm on the M8 countersunk socket screw, against 5.82 to 6 mm on the M6.
- Socket width across corners (e): at least 5.723 mm on the M8 countersunk socket screw, against at least 4.583 mm on the M6.
- Head height (k): 4.366 to 4.96 mm on the M8 countersunk socket screw, against 3.218 to 3.72 mm on the M6.
- Underhead fillet radius (r): at least 0.4 mm on the M8 countersunk socket screw, against at least 0.25 mm on the M6.
Other sizes
Conventions
- Simplified: plain shank at the nominal diameter, light for assemblies. Threaded: the ISO 68-1 thread, for close-ups and renders.
- Values given only as a limit are modeled at that limit.
- Head: a 90-degree cone (the lower limit of the one-sided head angle) laid out from the theoretical head diameter at the top face, cut by a cylindrical land at the actual head diameter (its minimum), sharp edges.
Documents
Sources
albany-clearance, amesweb-tap-drill, engineersedge-iso10642, fasten-it-iso10642, globalfastener-iso10642, globalfastener-iso10642-2026-drawing, globalfastener-iso10642-2026-lengths, iso4753-2011-sample, rule-basic-minor, rule-tap-drill, westfield-iso10642, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...