694, 694-2Z, 694-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
694, 694-2Z, 694-2RS Ball Bearing, ISO 15
1 / 7

694, 694-2Z, 694-2RS Ball Bearing, ISO 15

For a 4 mm shaft and an 11 mm housing bore, the 694 ball bearing (ISO 15) is 4 mm wide. Modeled as simplified STEP files.

694 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 694 bearing, 694-2Z bearing, 694-2RS bearing
  • Model id: iso15-694
  • Standard: ISO 15 · size 694

Versions

DesignationWhat differsPart keySimplified
694openiso15-694STEP
694-2Z2Z (shielded)iso15-694-2zSTEP
694-2RS2RS (sealed)iso15-694-2rsSTEP

Dimensions

Dimension symbols for 694 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter44nominalL1
DOutside diameter1111nominalL1
BWidth44nominalL1
rChamfer dimension0.150.15single limit (min), modeled at the limitL1

Drawing

Drawing of the 694 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-694.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 1050 N
  • Basic Load Ratings, C0r: 345 N
  • Limiting Speeds, Grease: 48000 min-1
  • Limiting Speeds, Oil (Oil-bath): 56000 min-1

The 694 ball bearing beside the 623 and the 604

The 694 is number 4 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 4 mm on the 694 ball bearing, against 3 mm on the 623 and 4 mm on the 604.
  • Outside diameter (D): 11 mm on the 694 ball bearing, against 10 mm on the 623 and 12 mm on the 604.
  • Width (B): 4 mm on the 694 ball bearing, the same on the 623 and the 604.
  • Chamfer dimension (r): at least 0.15 mm on the 694 ball bearing, against at least 0.15 mm on the 623 and at least 0.2 mm on the 604.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-694.pdf

. CC-1S015-DS-694 revA '?) CommunityCAD Size datasheet - 694 ISO 15 694 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 4mm shafts Part keys iso15-694, iso15-694-2z, iso15-694-2rs Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-694.pdf

ISO 15 single row deep groove ball bearings, 694 Size drawing - 694 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 694 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →