695, 695-2Z, 695-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
695, 695-2Z, 695-2RS Ball Bearing, ISO 15
1 / 7

695, 695-2Z, 695-2RS Ball Bearing, ISO 15

For a 5 mm shaft and a 13 mm housing bore, the 695 ball bearing (ISO 15) is 4 mm wide. Modeled as simplified STEP files.

695 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 695 bearing, 695-2Z bearing, 695-2RS bearing
  • Model id: iso15-695
  • Standard: ISO 15 · size 695

Versions

DesignationWhat differsPart keySimplified
695openiso15-695STEP
695-2Z2Z (shielded)iso15-695-2zSTEP
695-2RS2RS (sealed)iso15-695-2rsSTEP

Dimensions

Dimension symbols for 695 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter55nominalL1
DOutside diameter1313nominalL1
BWidth44nominalL1
rChamfer dimension0.20.2single limit (min), modeled at the limitL1

Drawing

Drawing of the 695 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-695.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 1190 N
  • Basic Load Ratings, C0r: 430 N
  • Limiting Speeds, Grease: 43000 min-1
  • Limiting Speeds, Oil (Oil-bath): 50000 min-1

The 695 ball bearing beside the 634 and the 605

The 695 is number 8 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 5 mm on the 695 ball bearing, against 4 mm on the 634 and 5 mm on the 605.
  • Outside diameter (D): 13 mm on the 695 ball bearing, against 16 mm on the 634 and 14 mm on the 605.
  • Width (B): 4 mm on the 695 ball bearing, against 5 mm on the 634 and 5 mm on the 605.
  • Chamfer dimension (r): at least 0.2 mm on the 695 ball bearing, against at least 0.3 mm on the 634 and at least 0.2 mm on the 605.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-695.pdf

. CC-1S015-DS-695 revA '?) CommunityCAD Size datasheet - 695 ISO 15 695 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 5 mm shafts Part keys iso15-695, iso15-695-2z, iso15-695-2rs Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-695.pdf

ISO 15 single row deep groove ball bearings, 695 Size drawing - 695 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 13 View from above Bearing 695 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →