608, 608-2Z, 608-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
608, 608-2Z, 608-2RS Ball Bearing, ISO 15
1 / 7

608, 608-2Z, 608-2RS Ball Bearing, ISO 15

The 608 ball bearing (ISO 15) has an 8 mm bore, a 22 mm outside diameter and a width of 7 mm. Get it as simplified STEP files.

608 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 608 bearing, 608-2Z bearing, 608-2RS bearing
  • Model id: iso15-608
  • Standard: ISO 15 · size 608

Versions

DesignationWhat differsPart keySimplified
608openiso15-608STEP
608-2Z2Z (shielded)iso15-608-2zSTEP
608-2RS2RS (sealed)iso15-608-2rsSTEP

Dimensions

Dimension symbols for 608 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter88nominalL1
DOutside diameter2222nominalL1
BWidth77nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 608 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-608.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 3650 N
  • Basic Load Ratings, C0r: 1370 N
  • Limiting Speeds, Grease: 34000 min-1
  • Limiting Speeds, Oil (Oil-bath): 40000 min-1

The 608 ball bearing beside the 698 and the 628

The 608 is number 19 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 8 mm on the 608 ball bearing, the same on the 698 and the 628.
  • Outside diameter (D): 22 mm on the 608 ball bearing, against 19 mm on the 698 and 24 mm on the 628.
  • Width (B): 7 mm on the 608 ball bearing, against 6 mm on the 698 and 8 mm on the 628.
  • Chamfer dimension (r): at least 0.3 mm on the 608 ball bearing, the same on the 698 and the 628.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-608.pdf

. CC-1S015-DS-608 revA '?) CommunityCAD Size datasheet - 608 ISO 15 608 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 8 mm shafts Part keys iso15-608, iso15-608-2z, iso15-608-2rs Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-608.pdf

ISO 15 single row deep groove ball bearings, 608 Size drawing - 608 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 View from above Bearing 608 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →