16005, 16005-2Z, 16005-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
16005, 16005-2Z, 16005-2RS Ball Bearing, ISO 15
1 / 7

16005, 16005-2Z, 16005-2RS Ball Bearing, ISO 15

The 16005 ball bearing (ISO 15) has a 25 mm bore, a 47 mm outside diameter and a width of 8 mm. Get it as simplified STEP files.

16005 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 16005 bearing, 16005-2Z bearing, 16005-2RS bearing
  • Model id: iso15-16005
  • Standard: ISO 15 · size 16005

Versions

DesignationWhat differsPart keySimplified
16005openiso15-16005STEP
16005-2Z2Z (shielded)iso15-16005-2zSTEP
16005-2RS2RS (sealed)iso15-16005-2rsSTEP

Dimensions

Dimension symbols for 16005 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter2525nominalL1
DOutside diameter4747nominalL1
BWidth88nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 16005 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-16005.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 9750 N
  • Basic Load Ratings, C0r: 5600 N
  • Limiting Speeds, Grease: 15000 min-1
  • Limiting Speeds, Oil (Oil-bath): 18000 min-1

The 16005 ball bearing beside the 6905 and the 6005

The 16005 is number 59 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 25 mm on the 16005 ball bearing, the same on the 6905 and the 6005.
  • Outside diameter (D): 47 mm on the 16005 ball bearing, against 42 mm on the 6905 and 47 mm on the 6005.
  • Width (B): 8 mm on the 16005 ball bearing, against 9 mm on the 6905 and 12 mm on the 6005.
  • Chamfer dimension (r): at least 0.3 mm on the 16005 ball bearing, against at least 0.3 mm on the 6905 and at least 0.6 mm on the 6005.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-16005.pdf

'?) CommunityCAD CC-1S015-DS-16005 revA Size datasheet - 16005 ISO 15 16005 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For Part keys 16005 - 2Z, front view, 0.75:1 16005 -2Z, view from above, 0.5:1 Sym.…

View full datasheet →

docs/CC-ISO15-SZ-16005.pdf

ISO 15 single row deep groove ball bearings, 16005 Size drawing - 16005 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 16005 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →