6000, 6000-2Z, 6000-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6000, 6000-2Z, 6000-2RS Ball Bearing, ISO 15
1 / 7

6000, 6000-2Z, 6000-2RS Ball Bearing, ISO 15

The 6000 ball bearing (ISO 15) has a 10 mm bore, a 26 mm outside diameter and a width of 8 mm. Get it as simplified STEP files.

6000 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6000 bearing, 6000-2Z bearing, 6000-2RS bearing
  • Model id: iso15-6000
  • Standard: ISO 15 · size 6000

Versions

DesignationWhat differsPart keySimplified
6000openiso15-6000STEP
6000-2Z2Z (shielded)iso15-6000-2zSTEP
6000-2RS2RS (sealed)iso15-6000-2rsSTEP

Dimensions

Dimension symbols for 6000 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1010nominalL1
DOutside diameter2626nominalL1
BWidth88nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 6000 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6000.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 5050 N
  • Basic Load Ratings, C0r: 1970 N
  • Limiting Speeds, Grease: 30000 min-1
  • Limiting Speeds, Oil (Oil-bath): 36000 min-1

The 6000 ball bearing beside the 6900 and the 6200

The 6000 is number 27 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 10 mm on the 6000 ball bearing, the same on the 6900 and the 6200.
  • Outside diameter (D): 26 mm on the 6000 ball bearing, against 22 mm on the 6900 and 30 mm on the 6200.
  • Width (B): 8 mm on the 6000 ball bearing, against 6 mm on the 6900 and 9 mm on the 6200.
  • Chamfer dimension (r): at least 0.3 mm on the 6000 ball bearing, against at least 0.3 mm on the 6900 and at least 0.6 mm on the 6200.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6000.pdf

* CC-1S015-DS-6000 rev A '?) CommunityCAD Size datasheet - 6000 ISO 15 6000 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 10 mm shafts Part keys iso15-6000, iso15-6000-2z, iso15-6000-2rs Files 3 STEP…

View full datasheet →

docs/CC-ISO15-SZ-6000.pdf

ISO 15 single row deep groove ball bearings, 6000 Size drawing - 6000 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 Bearing 6000 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the…

View full datasheet →