604, 604-2Z, 604-2RS Ball Bearing, ISO 15
The 604 ball bearing (ISO 15) has a 4 mm bore, a 12 mm outside diameter and a width of 4 mm. Get it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 604 bearing, 604-2Z bearing, 604-2RS bearing
- Model id:
iso15-604
- Standard: ISO 15 · size 604
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 604 | open | iso15-604 | STEP |
| 604-2Z | 2Z (shielded) | iso15-604-2z | STEP |
| 604-2RS | 2RS (sealed) | iso15-604-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 4 | | 4 | nominal | L1 |
| D | Outside diameter | | 12 | | 12 | nominal | L1 |
| B | Width | | 4 | | 4 | nominal | L1 |
| r | Chamfer dimension | 0.2 | | | 0.2 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-604.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 1050 N
- Basic Load Ratings, C0r: 345 N
- Limiting Speeds, Grease: 48000 min-1
- Limiting Speeds, Oil (Oil-bath): 56000 min-1
The 604 ball bearing beside the 694 and the 624
The 604 is number 5 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 4 mm on the 604 ball bearing, the same on the 694 and the 624.
- Outside diameter (D): 12 mm on the 604 ball bearing, against 11 mm on the 694 and 13 mm on the 624.
- Width (B): 4 mm on the 604 ball bearing, against 4 mm on the 694 and 5 mm on the 624.
- Chamfer dimension (r): at least 0.2 mm on the 604 ball bearing, against at least 0.15 mm on the 694 and at least 0.2 mm on the 624.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.