605, 605-2Z, 605-2RS Ball Bearing, ISO 15
The 605 ball bearing (ISO 15) has a 5 mm bore, a 14 mm outside diameter and a width of 5 mm. Get it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 605 bearing, 605-2Z bearing, 605-2RS bearing
- Model id:
iso15-605
- Standard: ISO 15 · size 605
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 605 | open | iso15-605 | STEP |
| 605-2Z | 2Z (shielded) | iso15-605-2z | STEP |
| 605-2RS | 2RS (sealed) | iso15-605-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 5 | | 5 | nominal | L1 |
| D | Outside diameter | | 14 | | 14 | nominal | L1 |
| B | Width | | 5 | | 5 | nominal | L1 |
| r | Chamfer dimension | 0.2 | | | 0.2 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-605.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 1460 N
- Basic Load Ratings, C0r: 505 N
- Limiting Speeds, Grease: 40000 min-1
- Limiting Speeds, Oil (Oil-bath): 50000 min-1
The 605 ball bearing beside the 695 and the 625
The 605 is number 9 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 5 mm on the 605 ball bearing, the same on the 695 and the 625.
- Outside diameter (D): 14 mm on the 605 ball bearing, against 13 mm on the 695 and 16 mm on the 625.
- Width (B): 5 mm on the 605 ball bearing, against 4 mm on the 695 and 5 mm on the 625.
- Chamfer dimension (r): at least 0.2 mm on the 605 ball bearing, against at least 0.2 mm on the 695 and at least 0.3 mm on the 625.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.