6005, 6005-2Z, 6005-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6005, 6005-2Z, 6005-2RS Ball Bearing, ISO 15
1 / 7

6005, 6005-2Z, 6005-2RS Ball Bearing, ISO 15

For a 25 mm shaft and a 47 mm housing bore, the 6005 ball bearing (ISO 15) is 12 mm wide. Modeled as simplified STEP files.

6005 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6005 bearing, 6005-2Z bearing, 6005-2RS bearing
  • Model id: iso15-6005
  • Standard: ISO 15 · size 6005

Versions

DesignationWhat differsPart keySimplified
6005openiso15-6005STEP
6005-2Z2Z (shielded)iso15-6005-2zSTEP
6005-2RS2RS (sealed)iso15-6005-2rsSTEP

Dimensions

Dimension symbols for 6005 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter2525nominalL1
DOutside diameter4747nominalL1
BWidth1212nominalL1
rChamfer dimension0.60.6single limit (min), modeled at the limitL1

Drawing

Drawing of the 6005 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6005.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 11100 N
  • Basic Load Ratings, C0r: 5850 N
  • Limiting Speeds, Grease: 18000 min-1
  • Limiting Speeds, Oil (Oil-bath): 22000 min-1

The 6005 ball bearing beside the 16005 and the 6205

The 6005 is number 60 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 25 mm on the 6005 ball bearing, the same on the 16005 and the 6205.
  • Outside diameter (D): 47 mm on the 6005 ball bearing, against 47 mm on the 16005 and 52 mm on the 6205.
  • Width (B): 12 mm on the 6005 ball bearing, against 8 mm on the 16005 and 15 mm on the 6205.
  • Chamfer dimension (r): at least 0.6 mm on the 6005 ball bearing, against at least 0.3 mm on the 16005 and at least 1 mm on the 6205.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6005.pdf

CC-1S015-DS-6005 revA Size datasheet - 6005 '?) CommunityCAD ISO 15 6005 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 25 mm shafts Part keys iso15-6005, iso15-6005-2z, iso15-6005-2rs Files 3 STEP…

View full datasheet →

docs/CC-ISO15-SZ-6005.pdf

ISO 15 single row deep groove ball bearings, 6005 Size drawing - 6005 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 6005 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →