609, 609-2Z, 609-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
609, 609-2Z, 609-2RS Ball Bearing, ISO 15
1 / 7

609, 609-2Z, 609-2RS Ball Bearing, ISO 15

The 609 ball bearing (ISO 15) has a 9 mm bore, a 24 mm outside diameter and a width of 7 mm. Get it as simplified STEP files.

609 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 609 bearing, 609-2Z bearing, 609-2RS bearing
  • Model id: iso15-609
  • Standard: ISO 15 · size 609

Versions

DesignationWhat differsPart keySimplified
609openiso15-609STEP
609-2Z2Z (shielded)iso15-609-2zSTEP
609-2RS2RS (sealed)iso15-609-2rsSTEP

Dimensions

Dimension symbols for 609 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter99nominalL1
DOutside diameter2424nominalL1
BWidth77nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 609 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-609.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 3700 N
  • Basic Load Ratings, C0r: 1430 N
  • Limiting Speeds, Grease: 32000 min-1
  • Limiting Speeds, Oil (Oil-bath): 38000 min-1

The 609 ball bearing beside the 699 and the 629

The 609 is number 23 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 9 mm on the 609 ball bearing, the same on the 699 and the 629.
  • Outside diameter (D): 24 mm on the 609 ball bearing, against 20 mm on the 699 and 26 mm on the 629.
  • Width (B): 7 mm on the 609 ball bearing, against 6 mm on the 699 and 8 mm on the 629.
  • Chamfer dimension (r): at least 0.3 mm on the 609 ball bearing, the same on the 699 and the 629.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-609.pdf

. CC-1S015-DS-609 revA '?) CommunityCAD Size datasheet - 609 ISO 15 609 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 9 mm shafts Part keys iso15-609, iso15-609-2z, iso15-609-2rs Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-609.pdf

ISO 15 single row deep groove ball bearings, 609 Size drawing - 609 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1 Bearing 609 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source…

View full datasheet →