26.1 mm Desktop Hard Drive, SFF-8301
The 26.1 mm desktop hard drive (SFF-8301) is up to 26.1 mm high, 101.6 mm wide and up to 147 mm long, with side holes 101.6 mm apart; bottom holes 95.25 mm apart across. Beside SFF-8301, its sources include documents from Seagate, Toshiba and Western Digital. Modeled as simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 26.1 desktop hard disk, 26.1 NAS hard drive, 26.1 SATA hard drive, 26.1 internal hard drive
- Model id:
drives-3-5-26-1
- Standard: SFF-8301:Rev 1.9 · size 26.1
Files
| Part key | Simplified | Threaded |
|---|
drives-3-5-26-1 | STEP | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| H | Drive height | | | 26.1 | 26.1 | single limit (max), modeled at the limit | L2 |
| L | Drive length | | | 147 | 147 | single limit (max), modeled at the limit | L2 |
| W | Drive width | 101.35 | 101.6 | 101.85 | 101.6 | nominal | L2 |
| yb2 | Bottom holes across | | 95.25 | | 95.25 | nominal | L2 |
| yb | Bottom hole from the side | | 3.18 | | 3.18 | nominal | L2 |
| xb1 | First bottom holes from the connector end | | 41.28 | | 41.28 | nominal | L2 |
| pb2 | First to second bottom holes (the A6 pair) | | 44.45 | | 44.45 | nominal | L2 |
| pb3 | First to third bottom holes (the A13 pair) | | 76.2 | | 76.2 | nominal | L2 |
| xs1 | First side hole from the connector end | | 28.5 | | 28.5 | nominal | L2 |
| ps | Side holes apart | | 101.6 | | 101.6 | nominal | L2 |
| hs | Side hole height | | 6.35 | | 6.35 | nominal | L2 |
| tp | Fastener penetration | 2.39 | | 3.56 | 2.975 | midpoint of min–max | L2 |
| dl | Lead-in diameter (the specification's example) | | 4 ref | | 4 | reference value | L2 |
| al | Lead-in angle (the specification's example) | | 90 ref | | 90 | reference value | L2 |
| cw | Connector overall width | | 42.73 ref | | 42.73 | reference value | L2 |
| cs | Connector datum B width | | 33.39 ref | | 33.39 | reference value | L2 |
| cb | Side to datum B | | 13.43 ref | | 13.43 | reference value | L2 |
| cy | Connector offset from the drive centreline | | 20.68 | | 20.68 | nominal | L2 |
| cz | Connector height above the bottom | 3.12 | 3.5 | 3.88 | 3.5 | nominal | L2 |
| ch | Connector housing height | | 4 ref | | 4 | reference value | L2 |
| cc | Datum C to the bottom hole | | 36.38 | | 36.38 | nominal | L2 |
Drawing

As a PDF: CC-DRIVE35-SZ-26.1.pdf.
Conventions
- STEP AP214, millimetres, the bottom face at Z = 0 centred on the origin, the length along X with the connector end toward +X.
Documents
Sources
seagate-100844774h, seagate-100845789f, sff8301-r1-9, sff8323-r1-6, toshiba-mg07aca-r02-figures, wd-hc550-r1-7-figures. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...