80x25 Cooling Fan, DC Axial
An 80 mm square cooling fan, 25.4 mm thick, with 4.5 mm mounting holes 71.5 mm apart. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 80x25 computer fan, 80x25 case fan, 80x25 DC brushless fan
- Model id:
fans-dc-axial-80x25
- Standard: DC axial fan · size 80x25
Files
| Part key | Simplified |
|---|
fans-dc-axial-80x25 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| a | Frame side | | 80 | | 80 | nominal | L1 |
| t | Frame thickness | | 25.4 | | 25.4 | nominal | L1 |
| e | Mounting hole spacing | | 71.5 | | 71.5 | nominal | L1 |
| dh | Mounting hole diameter | | 4.5 | | 4.5 | nominal | L1 |
Drawing

As a PDF: CC-DCFAN-SZ-80x25.pdf.
From the maker's data sheet
As written on the Mechatronics data sheet for this frame (mechatronics-dc-axial), one of the sheets this size's dimensions come from: the series, its models and features.
- Series: MR8025
- Models: MR8025L, MR8025M, MR8025H, MR8025E
- Operating Voltage: 12 or 24 VDC
- Bearing option: ball bearing or sleeve
- Construction: UL94V-0 plastic impeller and frame
- Air Flow: air exhaust over struts
- Features: soft start, polarity protection, auto-restart
- Options: tachometer output or locked rotor alarm signal; PWM speed control
The 80x25 cooling fan beside the 80x15 and the 80x38
The 80x25 is number 13 of the 18 DC axial fan cooling fans published here, listed from 25x10 to 120x38.
- Frame side (a): 80 mm on the 80x25 cooling fan, the same on the 80x15 and the 80x38.
- Frame thickness (t): 25.4 mm on the 80x25 cooling fan, against 15.3 mm on the 80x15 and 38 mm on the 80x38.
- Mounting hole spacing (e): 71.5 mm on the 80x25 cooling fan, the same on the 80x15 and the 80x38.
- Mounting hole diameter (dh): 4.5 mm on the 80x25 cooling fan, against 4.3 mm on the 80x15 and 4.3 mm on the 80x38.
Other sizes
Conventions
- Simplified only: frame, mounting holes, illustrative rotor; frame and blades as two coloured solids. STEP AP214, millimetres, Z along the fan axis, outlet (strut) face at Z = 0, intake (front) at Z = t, airflow toward -Z.
- Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
- Venturi bore (a + e)/2, hub, four struts, swept blades (seven from 60 mm, five below), rounded corners, edge fillets and chamfers and corner pockets are illustrative house rules, not any maker's dimensions.
Documents
Sources
delta-dc-axial, mechatronics-dc-axial, sunon-dc-fan-255e. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...