25x10 Cooling Fan, DC Axial
A 25 mm square cooling fan, 10 mm thick, with 2.8 mm mounting holes 20 mm apart. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 25x10 computer fan, 25x10 case fan, 25x10 DC brushless fan
- Model id:
fans-dc-axial-25x10
- Standard: DC axial fan · size 25x10
Files
| Part key | Simplified |
|---|
fans-dc-axial-25x10 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| a | Frame side | | 25 | | 25 | nominal | L1 |
| t | Frame thickness | | 10 | | 10 | nominal | L1 |
| e | Mounting hole spacing | | 20 | | 20 | nominal | L1 |
| dh | Mounting hole diameter | | 2.8 | | 2.8 | nominal | L1 |
Drawing

As a PDF: CC-DCFAN-SZ-25x10.pdf.
The 25x10 cooling fan beside the 30x10
The 25x10 is the first of the 18 DC axial fan cooling fans published here, listed from 25x10 to 120x38.
- Frame side (a): 25 mm on the 25x10 cooling fan, against 30 mm on the 30x10.
- Frame thickness (t): 10 mm on the 25x10 cooling fan, the same on the 30x10.
- Mounting hole spacing (e): 20 mm on the 25x10 cooling fan, against 24 mm on the 30x10.
- Mounting hole diameter (dh): 2.8 mm on the 25x10 cooling fan, against 3.2 mm on the 30x10.
Other sizes
Conventions
- Simplified only: frame, mounting holes, illustrative rotor; frame and blades as two coloured solids. STEP AP214, millimetres, Z along the fan axis, outlet (strut) face at Z = 0, intake (front) at Z = t, airflow toward -Z.
- Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
- Venturi bore (a + e)/2, hub, four struts, swept blades (seven from 60 mm, five below), rounded corners, edge fillets and chamfers and corner pockets are illustrative house rules, not any maker's dimensions.
Documents
Sources
delta-dc-axial, sunon-dc-fan-255e. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...